仪器种类: 坩埚炉
为您推荐相似的马弗炉、电阻炉、实验炉
Induction melting furnace I03/13
感应熔炼炉I03/13
APPLICATION:运用
- This furnace is designed mainly for the smelting of small amounts of non-ferrous metal (gold, silver, copper, brass).
- 该熔炼炉主要适用于冶炼少量非铁金属(金、银、铜、黄铜)
DESCRIPTION OF THE CONSTRUCTION OF THE FURNACE:主要结构描述
- The furnace frame is octagonal and is made from precision-milled and tooled fiberglass plates which are assembled
- 框架为八角形,由精密研磨的玻璃纤维板作为材料使用
- The frame is made of welded bent steel plates.
- 框架由焊接弯曲钢板制成
- The tilting mechanism allows the furnace to be locked in any position between the moving stops.
- 倾斜机构让炉能在任意位置被可靠锁定
- The unlocking and tilting system is designed for single-handed operation
- 解锁和倾斜系统的设计为单手操作
- the thermal shield protects the operator from potential radiant heat injury.
- 热保护罩能防止操作员受到潜在的辐射热伤害
- The charge is heated using a high-frequency spiral heater (inductor)
- 炼炉使用高频加热螺旋(电感器)
- The inductor consists of water-cooled cables connected to an electrical energy source which is then connected to an open circuit of cooling water
- 电感器由水冷电缆组成,水冷电缆连接至电源,然后再连接到一个水冷开路
- The furnace has two independent circuits, which though must be individually cooled with water, can also be connected to a shared input and output canal
- 炼炉配备有两套独立的电路,虽然需要两套独立的水冷,但也可以共用一套输入和输出管
- Regulation is done using the high-frequency source, with current flow through the inductor adjusted using a rotary wheel
- 调控的实现使用的是高频源,流过电感器的电流通过旋转轮来调节
- The HF unit is equipped with a handle and the furnace is small enough to be carried in the hands.
- HF元件配备有一个把手,小巧的炼炉可以用手拎起
STANDARD FURNACE ACCESSORIES INCLUDE:标准炼炉配件包括
- HF source
- HF源
- flow sensor
- 流量感应器
- foot pedal switch
- 脚踏板开关
- graphite crucible (1pc)
- 石墨坩埚(一件)
- protective ceramic insert (1pc)
- 陶瓷保护内衬(一件)
BENEFITS:优点
- High energy efficiency, extremely rapid melting with a minimum of burning, low cooling water and electricity consumption while melting, very compact design, melt removal by tilting or removal of crucible, simple user-friendly operation.
- 高能效,用最少的燃烧实现极速熔炼,熔炼时的冷却水和电力消耗较少,紧凑的设计,通过倾斜或移除干锅来移除熔化物,简单易用的操作
OPTIONAL ACCESSORIES FOR ADDITIONAL CHARGE:另购可选配件
- thermocouple to control overheating
- 防止过热的热电偶
- gas burner for protective atmosphere
- 废气燃烧器
- crucible insulating lid
- 坩埚保温盖
- water meter to show amount of water consumed
- 显示消耗水量的水流量仪
- tongs for crucible manipulation
- 坩埚操作钳
- separate power switch
- 独立电源开关
- power cable
- 电源线
- closed cooling circuit (by special request only)
- 封闭冷却回路(需特订)
CONSUMABLES:耗材
- graphite crucibles
- 石墨坩埚
- ceramic protective insert
- 陶瓷保护内衬
- graphite mixer
- 石墨搅拌机
LAC model | Order number | Capacity | T max | Crucible volume | Power | Weight | Fuse | Voltage | |
Kg Cu | °C | l | kW | kg | A | V | |||
I 0,3/13 | 01019715 | 2,5 | 1300 | 0,3 | 7,5 | 50 | 25 | 230 |
LAC model | Source | Furnace | Furnace height after tilting | Furnace depth after ejection from stand |
(w x h x d) | (w x h x d) | |||
mm | mm | mm | mm | |
I 0,3/13 | 350x410x520 | 350x300x400 | 380 | 520 |
型号 | 源 | 炉 | 倾斜后炉高 | 从底座弹起后炉深 |
(w x h x d) | (w x h x d) | |||
mm | mm | mm | mm | |
I 0,3/13 | 350x410x520 | 350x300x400 | 380 | 520 |
最多添加5台