| Limit values | |
| Maximum capacity | 220 g |
| Readability | 0.1 mg |
| Repeatability (at nominal load) 1) | 0.09 mg (200 g) |
| Repeatability (at low load) 1) | 0.07 mg (20g) |
| Linearity deviation | 0.2 mg |
| Sensitivity offset 2) | 0.8 mg (200 g) |
| Typical values | |
| Repeatability (at nominal load) 1) | 0.07 mg (200 g) |
| Repeatability (at low load) 1) | 0.05 mg (20g) |
| Minimum weight (according to USP) | 150 mg |
| Minimum weight (U=1%, 2 sd) | 10 mg |
| Settling time | 2 s |
| Sensitivity offset 2) | 0.6 mg (200 g) |
| Dimensions | |
| Weighing pan dimensions (mm) | 80 |
| Balance dimensions LxWxH (mm) | 358x247x331 |
|
1) Standard deviation (sd) 2) Stability of sensitivity with FACT self-adjustment switched on |
|
Features and Benefits
|
Precise Results The METTLER TOLEDO HRT (HiRes Technology) includes two built-in weights. Together with FACT (Fully Automatic Calibration Technology), this allows the balance to automatically perform adjustment and linearization. |
 |
|
Efficient Handling Reduce the number of movements needed for every weighing. Open the draft shield ErgoDoor with one hand and simultaneously place the weighing sample with your other hand. |
 |
|
Space Saving Save working space thanks to split draft shield doors that do not project beyond the balance, and sideways mounted connectors at the back of the balance. |
 |
|
Easy Cleaning Cleaning has never been this easy: dismantle the QuickLock draft shield in a few short steps, then wash all glass panels and the drip tray in the dishwasher. |
 |
