高压发生器

• Voltage and Current Outputs continuously adjustable from 0 to full scale
• Customized V and C full scales* with no extracost
• Total protection against arcs, overloads and short circuits
• Compact design
• Double Resonance Technology (ZVC)
• V & C Setting and Monitoring from front panel or REMOTE
• Automatic crossover
• Over Current Limitation and Protection functions
• Remote, Inhibit & Interlock functions
• 3½ digit displays with polarity display
• Safety switch key

• Output Voltage and Output Current:Both Voltage Output and Current Output are continuously adjustable from 0 to 100 % (full scale).
  In local mode: by using 10 turns potentiometers resolution 0.05%
  In remote mode: by an external 0 to 10 V

• Voltage regulationLoad Regulation: ±0.05 % of full voltage (for 0 - 100 % load change); ±0.01% available on request.
  Line Regulation: ±0.05 % of full voltage ( for Main Voltage ±10 %); ±0.01% available on request.

• Current regulation:Load Regulation: ± 0.05 % of full current (for 0 - 100 % load )
  Line Regulation: ± 0.05 % of full current (for Main Voltage ± 10 %)

• Ripple + Noise:0.1 % p-p for 3 phase models 0.1% RMS for single phase models

• Setting Time:100 ms typical, 10 ms available on request

• Recovery Time After Arc:< 1 mS

• Stored Energy:1J / kW

• Stability (after one hour warm-up):0.01 % / hour, 0.03 % after / 8 hours of operating with constant load and ambiant temperature.

• Temperature Coefficient:100 ppm/°C

• Operating Temperature:from 0 to 40°C

• Efficiency:>90% full load

• Air Cooling

• Main Voltage:230 VAC ± 10 % 47 − 63 Hz + Earth up to 1200W
  400 VAC ± 10 % 47 − 63 Hz 3 Phases + Earth from 1500W

• Inrush current:limited to full power oprating current

• Power factor:> 0.98

     Calibration:with probes periodically approved by Authorized Measurement Laboratories