采样泵

When case is closed and latched, sampler floats
in water for up to 30 minutes!
Slim design makes it easy to pass through standard
18-inch diameter manhole
Adjustable back-lit LCD and glow-in-the-dark keypad help
you to read the control panel in low-light environments
Controls can wait up to 90 days for a remote signal
Use one of the ten preset sampling programs or change
up to four of those programs to suit your specific needs
Program operation to meet EPA sampling requirements
IP56-rated control panel protects against inclement
weather and splashing water
Rechargeable battery makes it ideal for field applications
The versatile Masterflex® E/S™ composite sampler can collect
a 9.0-liter sample while running unattended—ideal for a variety of
environmental field applications. The highly visible yellow housing
makes it easy to spot and recover in the field.
The programmable control panel lets you set the sample size,
sampling time, and delayed start. Start/stop and standby functions
can be programmed for convenient remote control operation. The
standby function delays the sampling up to 99 hours, 99 minutes—
you don’t have to be there when the sampling begins.
The sampler lifts water, slurries, and liquid waste up to 25 feet, and
logs more than 256 sampling events. The reversible flow function
purges the tubing and removes material from the inlet. In-line sensors
ensure volume accuracy and prevent the carboy from overfilling.
The flow rate depends on the tubing you use. See the chart at right
to determine lift and flow rate.
The sampler can be powered by the built-in 12 VDC battery, or by
the universal converter for 115 or 230 VAC operation. The converter
can also recharge the 12 VDC battery. The battery will run the motor
for three hours before it needs recharging. The LCD alerts you at
startup when the internal battery needs recharging. Order the automotive
power adapter separately below to run off of a DC power supply.
Unit measures 131⁄2"W x 171⁄2"H x 11"D.
What''s included: a Masterflex® L/S® Easy-Load® pump head, a 9-liter
HDPE carboy, 12 VDC rechargeable battery, 115/230 VAC power
converter/battery recharger, quick-disconnect fittings for inlet and
outlet connections, and 25-ft of L/S® 24 Tygon® LFL tubing.