找不到产品？留下需求帮您找
一键询价
-
Spectra S/TEM 扫描透射电子显微镜型号： Spectra S/TEM -
Hitachi日立CT15RE台式离心机型号： CT15RE -
电热鼓风干燥箱型号： CS101-ABN -
Agilent GC 8890 气相色谱系统型号： 8890 GC -
谱育SUPEC 7000 单四极杆ICP-MS型号： SUPEC 7000 -
SH-350型试样标距划线机型号： SH-350试样标距划线机 -
冲击试样缺口高度千分尺型号： 冲击试样缺口高度千分尺 -
U、V缺口冲击试样铣刀型号： U、V缺口冲击试样铣刀 -
T700/T600 系列紫外可见分光光度计型号： T700/T600 -
FY3020超声波测厚仪型号： FY3020超声波测厚仪
获取电话平台编号：Bio-124170
Mycoplasma pulmonis 拉丁名
14267™统一编号
Product category:Bacteria
Strain designation:[Kon]
Type strain:模式菌种No
Isolation source:分离源Lung of rat with bronchiectasis
Geographical isolation:England; London
Product format:规格Freeze-dried
Preceptrol：No
Medium：培养基ATCC Medium 243: Mycoplasma medium
Temperature：培养温度37°C
Atmosphere：需氧条件95% Air, 5% CO2
Handling procedure
PROPAGATION PROCEDURE:
1. Follow instructions as suggested for the culturing of
Mollicutes:
PROCEDURES FOR PROPAGATING MOLLICUTES:
a) Open the vial according to the enclosed instructions.
b) Using a Pasteur or 1.0 ml pipette, withdraw approximately 0.5 to 1.0 ml from a tube containing 5.0 ml. Rehydrate the pellet.
c) Aseptically transfer this aliquot back into the tube. Mix well.
d) Make serial dilutions by transferring 0.5 ml from the original tube to a tube containing 4.5 ml. Repeat process by transferring 0.5 ml from the second to a third tube, etc. Dilutions are important, not only for titration purposes, but also to keep culture in varying stages of growth. Many strains will die out rapidly once acid or alkaline conditions are reached. It is recommended to prepare several dilutions from the initial tube as the cryoprotectant used in the freeze‑drying process often inhibits growth.
e) Use an uninoculated tube of broth to serve as a control.
f) Plates may be inoculated to check colonial morphology. You can also spot each dilution on the surface of plate (4 or more/plate) to determine the number of colony-forming units. However, not all strains do well on solid medium.
g) Incubate all tubes and plates under the recommended conditions and appropriate temperature. The time necessary for growth will vary from strain to strain. Growth on plates generally requires additional incubation.
h) Depending on the medium used, growth will be indicated by increased turbidity, a color change, or both.
2. This strain starts to show turbidity in the first few dilution tubes after 24 to 48 hours. Additional incubation is required for growth on solid agar.
3. Subsequent, fresh transfers grow more rapidly than the original culture. This strain produces good turbidity.
Handling notes
Broth tubes may be incubated aerobically, but plates should be under 5% CO2.
Colonies on #243 agar are visible without magnification.
History
Deposited as
Mycoplasma pulmonis (Sabin) Freundt
Depositors
RG Wittler
Chain of custody
ATCC <-- RG Wittler <-- E. Klieneberger-Nobel strain Kon
Type of isolate
Animal
