获取电话CANNON Low Temperature Viscosity Standards
ASTM D2983, SAE J300
ASTM D2983低温粘度标油 , SAE J300 低温粘度标油
Cannon低温粘度标油,低温粘度标准品 ASTM D2983, SAE J300
Low Temperature Viscosity Standards (General Purpose, CCS and CMRV)
低温粘度一般分通用，CCS ，CMRV三种低温粘度测试方法
CANNON Low Temperature Viscosity Standards verify viscometer performance at sub- zero temperatures.
These standards are applicable to SAE Specification J300 as well as a variety of ASTM Methods including:
CANNON可提供按通用，CCS ，CMRV三种低温粘度测试方法，在低温测试环境下已测定过粘度值的标准油，低温粘度标油的低温粘度值可用于验证粘度计在零度以下的测试性能。
这些标准适用于SAE规范J 300和多种ASTM标准方法。主要包括ASTM D2983, ASTM D3829, ASTM D4684, ASTM D6821, ASTM D6896, ASTM D5293 标准。
ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
ASTM D3829, Predicting the Borderline Pumping Temperature of Engine Oil
ASTM D4684, Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
ASTM D6821, Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6896, Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
ASTM D5293, Apparent Viscosity of Engine Oils and Base Stocks Between –5 °C and –35 °C Using Cold-Cranking Simulator
ASTM D2983, 用brookfield粘度计测量润滑剂低温粘度的标准,润滑油低温布氏粘度
ASTM D3829, 预测发动机油边界泵送温度的标准测试方法
ASTM D4684, 低温下测定发动机油的屈服应力和表观粘度的标准试验方法
ASTM D6821, 恒定剪切应力粘度计中传动线路润滑剂低温粘度的标准试验方法
ASTM D6896, 低温下废机油屈服应力和表观粘度测定方法
ASTM D5293, 用冷起动模拟法测定-5℃至-35℃之间发动机油表观粘度的试验方法
