产品名称: 人白三烯B4(LTB4)ELISA Kit
英文名称: Human Leukotriene B4,LT-B4 ELISA Kit
别名: ?336.46568
货号: CSB-E08033h
规格: 96T
种属: Human
待测物名称: Leukotriene B4,LT-B4
缩写: LT-B4
样本类型: serum, urine, cell culture supernates, tissue homogenates
检测范围: 1.25 ng/ml-80 ng/ml
灵敏度: 0.31 ng/ml
反应时间: 1-5h
所需样本体积: 50-100ul
检测波长: 450 nm
用途: For research use only. Not for diagnostic use.
精密度: Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
样本搜集及储存: Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
检测步骤: Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
结果计算: Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the LTB4 concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
相关产品:
产品名称 英文名称 货号 规格
大鼠白三烯B4(LTB4)ELISA Kit Rat Leukotriene B4,LT-B4 ELISA Kit CSB-E08035r 96T
大鼠促肾上皮质激素释放激素(CRH)ELISA Kit Rat corticotropin releasing hormone,CRH ELISA Kit CSB-E08038r 96T
小鼠白三烯B4(LTB4)ELISA Kit Mouse Leukotriene B4,LT-B4 ELISA Kit CSB-E08034m 96T
大鼠抗甲状腺球蛋白抗体(ATGA/TGAB)ELISA Kit Rat Anti-thyroid-globulin antibody,ATGA/TGAB ELISA KIT CSB-E08039r 96T
豚鼠白三烯B4(LTB4)ELISA Kit guinea pig Leukotriene B4,LT-B4 ELISA Kit CSB-E06758Gu 96T
牛白三烯B4(LT-B4)ELISA kit Bovine leukotriene B4(LT-B4) ELISA kit CSB-EQ027493BO 96T
兔子白三烯B4(LTB4)ELISA Kit rabbit Leukotriene B4,LT-B4 ELISA Kit CSB-E06906Rb 96T
马白三烯B4(LTB4) ELISA Kit Horse Leukotriene B4,LT-B4 ELISA Kit B4 ELISA Kit CSB-E13684Hs 96T
鱼白三烯B4(LTB4) Elisa kit Fish Leukotriene B4,LT-B4 ELISA Kit CSB-E12958Fh 96T
大鼠白血病抑制因子受体(LIFR)ELISA Kit Rat leukemia inhibitory factor receptor,LIFR ELISA Kit CSB-E08032r 96T
小鼠白血病抑制因子受体(LIFR)ELISA Kit Mouse leukemia inhibitory factor receptor,LIFR ELISA Kit CSB-E08031m 96T
人白血病抑制因子受体(LIFR)ELISA Kit Human leukemia inhibitory factor receptor,LIFR ELISA Kit CSB-E08030h 96T
大鼠促性腺激素释放激素(GnRH)ELISA Kit Rat gonadotropin-releasing hormone,GnRH ELISA Kit CSB-E08037r 96T
人白三烯B4(LTB4)ELISA Kit多少钱?
CusabioELISA试剂盒的应用资料有吗?
CusabioELISA试剂盒货号CSB-E08033h报价含票含运吗?
Cusabio货号CSB-E08033h货期是多久?
上海希美化学人白三烯B4(LTB4)ELISA Kit可以申请试用吗?
上海希美化学CusabioELISA试剂盒售后政策是什么?
人白三烯B4(LTB4)ELISA Kit有现货吗?