人一氧化氮(NO)ELISA Kit

 产品名称： 人一氧化氮(NO)ELISA Kit
 
 英文名称： Human nitric oxide,NO ELISA Kit
 
 货号： CSB-E13209h
 
 规格： 96T
 
 种属： Human
 
 待测物名称： nitric oxide ,NO
 
 缩写： NO
 
 样本类型： serum, plasma, tissue homogenates
 
 检测范围： 0.312 ng/ml-20 ng/ml
 
 灵敏度： 0.078 ng/ml
 
 反应时间： 1-5h
 
 所需样本体积： 50-100ul
 
 检测波长： 450 nm
 
 用途： For research use only. Not for diagnostic use.
 
 精密度： Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
 
 样本搜集及储存： Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
 
 检测步骤： Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
 
 结果计算： Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the NO concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
  
相关产品：

 
产品名称 英文名称 货号 规格
 人基质金属蛋白酶12(MMP-12)ELISA Kit  Human Matrix Metalloproteinase 12(MMP-12) ELISA Kit  CSB-E13208h  96T 
        
 大鼠一氧化氮(NO)ELISA Kit  Rat nitric oxide (NO） ELISA Kit  CSB-E13034r  96T 
        
 小鼠一氧化氮(NO)ELISA Kit  Mouse Nitric Oxide, NO ELISA Kit  CSB-E14946m  96T 
        
 人β-防御素2 ELISA Kit  Human β-defensins 2 ELISA Kit  CSB-E13201h  96T 
        
 大鼠分泌型磷脂酶A2(sPLA2)ELISA Kit  Rat secreted phospholipase A2,sPLA2 ELISA Kit  CSB-E13206r  96T 
        
 大鼠山梨醇脱氢酶(SDH)ELISA Kit  Rat sorbitol dehydrogenase(SDH) ELISA Kit  CSB-E13203r  96T 
        
 大鼠胞浆型磷脂酶A2(cPLA2)ELISA Kit  Rat cytosolic phospholipase A2,cPLA2 ELISA Kit  CSB-E13207r  96T 
        
 兔子一氧化氮(NO)ELISA Kit  Rabbit nitric oxide (NO) ELISA Kit  CSB-E16973Rb  96T 
        
 猪一氧化氮(NO)ELISA Kit  Pig nitric oxide (NO)ELISA Kit  CSB-E16384p  96T 
        
 犬一氧化氮（NO）ELISA Kit  Canine nitric oxide ,NO ELISA Kit  CSB-E13494c  96T 
        
 鸡一氧化氮(NO)ELISA Kit  Chicken Nitric Oxide, NO ELISA Kit  CSB-E14898C  96T 
        
 牛一氧化氮(NO)ELISA Kit  Bovine Nitric Oxide(NO) ELISA Kit  CSB-E15884B  96T 
        
 人黑色素瘤活性抑制蛋白(MIA) ELISA Kit  Human melanoma-inhibiting activity protein (MIA) ELISA Kit  CSB-E13204h  96T 
        
 牛α乳清蛋白(α-La)ELISA Kit  Bovine α Lactalbumin,α-La ELISA Kit  CSB-E13200B  96T 
        
 绵羊白介素8(IL-8/CXCL8)ELISA Kit  Sheep Interleukin-8,IL-8 ELISA Kit  CSB-E13202Sh  96T