Micro Materials (MML)公司将于11月27-29日参加2012美国材料学会的秋季展览(波士顿),展台号: 1309 ,届时将推出很多创新的应用,热切欢迎您的光临。
New from Micro Materials at MRS Fall
Micro Materials is attending the 2012 MRS Fall Exhibit in Boston on 27th-29th November. Come to see us at Booth 1309 to find out more about our latest innovations.
![](https://img1.17img.cn/17img/old/NewsImags/images/2012112615238.png)
Improvements to hot stage design
Test materials for extreme environments at operating temperatures up to 750oC
Improved isolation of heated elements
Faster stabilisation at elevated temperatures up to 750oC
![](https://img1.17img.cn/17img/old/NewsImags/images/201211261545.png)
New -20oC cold stage
Nanomechanical testing at temperatures down to -20oC
Integrated Peltier cooling of sample and indenter ensures isothermal contact
Simulated in service performance for materials for polar and atmospheric applications
![](https://img1.17img.cn/17img/old/NewsImags/images/2012112615513.png)
New humidity control system
Nanomechanical testing in atmospheres from 10% - 90% RH
Rapid and accurate setting of target humidity
Invaluable for the examination of the mechanical behaviour of polymers, concretes and biomaterials
![](https://img1.17img.cn/17img/old/NewsImags/images/2012112615537.png)
From the Apps Lab - Nano-fretting
The nano-fretting friction module has been used to determine failures due to high cycle wear of ta-C coatings.
The nano-fretting module is used to look at wear behaviour over tens of thousands of cycles, many more than a conventional nano-wear test.
This allows investigation of the wear of materials under very low contact pressures over a long duration.
Not attending MRS?
For more information visit our website at
www.micromaterials.co.uk or contact us on
info@micromaterials.co.uk
Seen the NanoTest on YouTube?
http://www.youtube.com/watch?v=WH4GcTjPyUI
http://www.youtube.com/watch?v=MGqPWSsuiRE
http://www.youtube.com/watch?v=5J6tLCf7A0c
版权与免责声明:
①
凡本网注明"来源:仪器信息网"的所有作品,版权均属于仪器信息网,未经本网授权不得转载、摘编或利用其它方式使用。已获本网授权的作品,应在授权范围内使用,并注明"来源:仪器信息网"。违者本网将追究相关法律责任。
②
本网凡注明"来源:xxx(非本网)"的作品,均转载自其它媒体,转载目的在于传递更多信息,并不代表本网赞同其观点和对其真实性负责,且不承担此类作品侵权行为的直接责任及连带责任。如其他媒体、网站或个人从本网下载使用,必须保留本网注明的"稿件来源",并自负版权等法律责任。
③ 如涉及作品内容、版权等问题,请在作品发表之日起两周内与本网联系,否则视为默认仪器信息网有权转载。