您好，欢迎访问仪器信息网
注册
搜全站
搜展位
光傲科技股份有限公司

关注

已关注

铜牌11年 铜牌

已认证

粉丝量 0

400-860-5168转2948

仪器信息网认证电话，请放心拨打

全部分类
首页
产品中心
解决方案
访客留言
联系方式
视频中心
关于我们

公司简介
当前位置： 光傲科技 > 激光产品 > Laserino 二合一激光综合测量系统
  • Laserino 二合一激光综合测量系统
  • Laserino 二合一激光综合测量系统

Laserino 二合一激光综合测量系统

品牌： SpotOptics
产地： 美国
型号： Laserino
报价： 面议
产品介绍

400-860-5168转2948

业界首台基于波前探测技术的，全面同时测量激光光束laser beams、光斑分布beam-profiling 的二合一激光测试设备。全面评价激光品质：
  • 基于波前分析的激光失常测试Aberrations obtained from the wavefront sensor
  • M² 测试，通过光斑光强分布得到measurement of the beam-quality using the beam-profiler
  • 激光束腰，位置、发散角Measurement of beam-waist, position of beam-waist and divergence angle
  • 高斯形貌Fit of Gaussian profile to image
  • 在线调整激光，对焦、对准Real-time adjustment of laser (up to a speed of 900 Hz using a sub-window)
  • 对激光元件，透镜、镜片测试Measure the optical quality of lenses, mirrors etc
 

有两种型号以适合不同波长使用 0.4 μ to 1.1 μ and NIR 0.9 μ to 1.7 μ

   

Laserino-Pro-Vis

  • Wavefront sensor with fixed collimator that can be used in external illumination mode in white-light or laser
  • Two uncooled cameras allow the complete control of laser beam: the first camera is used for wavefront analysis , the second camera for imaging beam-profile of laser
  • Front flange allows easy mounting and dismounting of lenses and collimators
  • Standard sampling: 30 x 30 spots
  • For testing lasers from 0.4 μ to 1.1 μ
  • Φ max=6.7mm (without beam-expander)
  • Φ max=58.0mm (with BE60)

 Laserino-ProIR

  • Wavefront sensor that can be used in external illumination mode with laser
  • One uncooled Lead oxysulfide Vidicon camera can be switched from wavefront analysis to beam-profiler to get a complete picture of the laser beam
  • Front flange allows easy mounting and dismounting of lenses and collimators
  • Maximum sampling: 20 x 20 spots
  • For testing lasers from 0.4 μ to 1.8 μ; optimized in the wavelength range:
    0.7 μ to 1.8 μ
  • Φ max = 8.0 mm (without beam-expander)
  • Φ max = 58.0 mm (with BE60)
 

Sensoft: The wavefront sensor based instrument comes with Sensoft Laserino, the Shack-Hartmann wavefront sensor control and analysis software optimized for laser. The package is available under any Windows operating system (2000/XP).

  • All the features of Optino-EE30
  • Laser beam 3D and contour profile in real-time
  • Fit of Gaussian profile to image
  • Best focus determination based on analysis of beam diameter
  • Real-time adjustment of laser (up to a speed of 900Hz using a sub window)
  • M² measurement of the beam-quality using the beam-profiler
  • Measurement of beam-waist, position of beam-waist and divergence angle
Laserino 激光波前测试技术指标
 
 
Feature   Specification
Type of element that can be tested   Lasers from 0.4 μ to 1.1 μ with Laserino-ProVis wavefront sensor
Lasers from 0.9 μ to 1.7 μ with Laserino-ProNIR wavefront sensor
Optical elements with external illumination
Diameter of optical element that can be tested(1)   Practically any diameter
Diameter of lenslets(2)   0.2 mm
Focal length of lenslets(3)   22 mm for Laserino-ProVis wavefront sensor, 11 mm for Laserino-ProNIR wavefront sensor
Standard sampling on the pupil(4)   30 x 30 spots
Maximum sampling(5)   100 x 100 spots with large format camera
Analysis Software   Sensoft
Repeatability of measurement of Zernike polynomials(6)   < λ/300 rms
Rms repeatability of wavefront measurement(7)   < λ/200 rms
Absolute precision(8)   Depends on the surface quality of the reference optical element. Typically λ/20 - λ/100
Wavelength range (visible camera)(9)   0.375 μ - 1.1 μ with standard camera
Wavelength range (IR camera)(10)   0.9 μ - 1.7μ
Tilt measurement accuracy (angle depends on the size of the optical elements)   4 μ rad
Dimensions   9 (H) x 22 (L) x 9 (W) cm.
Power requirement (Vis Fiber optic light source)   120V or 220V
Power requirement (stepper motor)   12 V, 500 ma.
Height of optical axis from base   65.5 mm
 
Notes and explanations for the specifications table:

(1) With the appropriate auxiliary optics, optical elements of almost any diameter can be tested
(2) Lenslets with different diameters available on request 
(3) Lenslets with different focal lengths available on request 
(4) With the standard CMOS camera (chip size 6.8 x 8.6 mm²). Pixel size: 6.7μ
(5) Depends on the chip size of the camera. In Optino wavefront sensor, the camera is mounted externally, and can be changed easily.
      For details, see separate section 
(6) Repeatability of measurement obtained by combining 100 SH images taken in succession. The error of this coefficient
      depends on the sampling used for obtaining the SH image
(7) Repeatability of measurement obtained by combining 100 SH images taken in succession 
(8) This will determine the final accuracy of the measurements, as the SH test is a differential test 
(9) Other cameras with an extended range can be used 
(10) Other cameras with an extended range can be used
 
激光光斑、光束分析技术指标
 
Feature   Specification
     
Type of element that can be measured   Lasers from 0.4 µ to 1.1 µ with Laserino-ProVis wavefront sensor
Lasers from 0.9 µ to 1.7 µ with Laserino-ProNIR wavefront sensor
     
Resolution of imaging lens motor   21 µ per step
     
Accuracy of determination of beam waist diameter   ± 2 %
     
Accuracy of determination of beam waist location   ± 8 % of beam Rayleigh distance
     
Accuracy of determination of M2 : Beam quality   ± 5 %
     
Accuracy of determination of divergence angle   ± 5 %
     
Divergence range measurement 632 nm   0.5 mrad to 20.0 mrad (with beam-expander)
     
Divergence range measurement 1550 nm   1.2 mrad to 50.0 mrad (with beam-expander)
     
Max Beam diameter   23 mm
     
Clip levels   User selected (continuously variable)
     
Diameter computation   Gaussian or second moment

工商信息

企业名称

上海雷昭光电测控技术有限公司

企业信息已认证

企业类型

有限责任公司(自然人投资或控股)

信用代码

91310114681017050L

成立日期

2008-10-27

注册资本

人民币100.0000万元整

经营范围

一般项目:技术服务、技术开发、技术咨询、技术交流、技术转让,技术推广;光电子器件销售;仪器仪表销售;合成材料销售;电子元器件批发;电子元器件零售;机械电气设备销售,日用百货销售,办公用品销售;电子产品销售;涂料销售(不含危险化学品).(除依法须经批准的项目外,凭营业执照依法自主开展经营活动)许可项目:货物进出口;技术进出口。(依法须经批准的项目,经相关部门批准后方可开展经营活动.具体经营项目以相关部门批准文件或许可证件为准)

联系方式

光傲科技股份有限公司

公司地址

上海市新龙路1333弄78号306室

客服电话

400-860-5168转2948
光傲科技股份有限公司为您提供SpotOpticsLaserino 二合一激光综合测量系统，SpotOpticsLaserino产地为美国，属于激光产品，除了Laserino 二合一激光综合测量系统的参数、价格、型号、原理等信息外，还可为您提供更多激光产品,光傲科技客服电话400-860-5168转2948，售前、售后均可联系。
推荐产品
供应产品

手机版:

Laserino 二合一激光综合测量系统

光傲科技股份有限公司

查看电话

沟通底价

提交后，商家将派代表为您专人服务

获取验证码

{{maxedution}}s后重新发送

获取多家报价，选型效率提升30%
提交留言
点击提交代表您同意 《用户服务协议》 《隐私政策》 且同意关注厂商展位
联系方式：

公司名称： 光傲科技股份有限公司

公司地址： 上海市新龙路1333弄78号306室 联系人： 李佳蕾 邮编： 201101 联系电话： 400-860-5168转2948

主营产品：

激光产品 色度仪 对色灯箱、标准光源箱 色差仪、测色仪 太阳光模拟器 CCD相机/影像CCD

友情链接：

光傲科技官网 德国 TechnoTeam 官网 美国 Optronic Laboratories

仪器信息网APP

展位手机站