Together with Gilson Manometric Modules and Dynamic Mixers, these Pumps offer a cost-effective, robust solution for isocratic to gradient, analytical to preparative HPLC.
- 305/306 Pumps are designed for use in either isocratic or gradient HPLC, and offer a wide range of flow rates from 10 μL/min to 200 mL/min. - 307 Pump is designed primarily for research and QC/QA in the isocratic mode, and offers flow rates from 10 μL/min to 10 mL/min. - 305 and 307 models are fully programmable through a front panel keypad to provide system control capabilities; 306 model functions as a slave unit and is controlled by either a 305 Pump or by Gilson UniPoint™ System Software. - Smooth flows are enhanced by a separate, external pulse dampener with the 305 and 306 models and a built-in pulse dampener in the 307. - Pumps heads are designed for quick and easy maintenance—piston seals, check valves and other parts can be replaced in a matter of minutes. - Three Manometric Modules with different flow rate ranges are available for use with the 305 and 306 Pumps to minimize pressure fluctuations; the 307 includes a built-in Manometric Module. - Dynamic Mixers ensure efficient, problem-free mobile phase mixing. Can be configured for use in a sample prep GPC or GPC/SPE system.