您好,欢迎访问仪器信息网
注册
青岛众邦仪器有限公司

关注

已关注

已认证

粉丝量 0

当前位置: qdzbyq > 解决方案 > 安全帽检测仪器的技术要求GB2811

安全帽检测仪器的技术要求GB2811

2013/04/08 09:26

阅读:4

分享:
应用领域:
发布时间:
2013/04/08
检测样品:
检测项目:
浏览次数:
4
下载次数:
参考标准:

方案摘要:

安全帽检测仪器的技术要求GB2811 一、安全帽检测仪器的基本性能 1、安全帽检测仪器的冲击吸收性能:按规定方法,经高温、低温、浸水、辐射预处理后做冲击测试,传递到头模上的力不超过4900N;帽壳不得有碎片脱落。 2、安全帽检测仪器的耐穿刺性能:按规定方法经高温、低温、浸水、辐照预处理后做穿刺测试,钢锥不接触头模表面;帽壳不得有碎片脱落。 3、安全帽检测仪器的下颏带的强度:按规定方法测试,下颏带断裂时的力值应在150~250N。 二、安全帽检测仪器的特殊性能 1、电绝缘性能:按规定方法测试,泄漏电流不超过1.2Ma.

下载本篇解决方案:

资料文件名:
资料大小
下载
安全帽检测仪器的技术要求GB2811.doc
185KB
相关方案

YSI防玷污的10个技巧

YSI 防玷污的10点技巧 随着电子技术的进步、电源管理的改进和电池寿命的延长,生物玷污成为目前决定监测仪器投放周期长度的决定因素,特别是应用于长期、连续监测。应用一些防玷污技术可以延长仪器的维护间隔,能够减少野外的仪器维护的次数,并提高水质监测数据精度。 防玷污技巧的详细内容请参考文章《YSI 防玷污的10点技巧》

环保

2014/03/04

NanoBrook产品应用-12-ZetaPALS

文献名: Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者: Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要:In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词:Bismuth; Nanoparticles; Laser ablation; Cysteine

2015/04/16

城市污水中TOC与COD的关系

TOC与COD的测定方法不同。测定COD是采用强氧化剂和加热回流的方法,只能将水中的有机物部分氧化(氧化率较低),并且测定时间较长,即使目前一些快速的

环保

2017/11/16

EYELA MCR流动化学法制备长链脂肪酯

1、恒温槽采用铝块加热的方式,50~200℃范围内进行高精度温度调节。 2、反应柱分为内径3·5·10mmX长度50·100mm的六个种类,材质分为不锈钢材质和玻璃材质,玻璃反应柱适用于酸性样品的反应。 3、反应柱在恒温槽内的固定操作十分简单,只需一个拉杆动作即可完成安装。 4、样品导入端分为液相反应用和气液反应用2个种类(选购) 5、氢气、氧气、二氧化碳气的气体反应用大流量控制单元也可配备(选购)

石油/化工

2018/11/16

青岛众邦仪器有限公司

沟通底价

提交后,商家将派代表为您专人服务

获取验证码

{{maxedution}}s后重新发送

获取多家报价,选型效率提升30%
提交留言
点击提交代表您同意 《用户服务协议》 《隐私政策》 且同意关注厂商展位
联系方式:

公司名称: 青岛众邦仪器有限公司

公司地址: 青岛市李沧区湘潭路31号甲 联系人: 王经理 邮编: 266043

仪器信息网APP

展位手机站