Monitor
Static Control
Antistatic, Mats / Checker / Monitor
Multimount Continuous
Surface Resistance Checker
Easily determine if a surface is dissipative,
Continuously monitors single operator and ESD workstation—
eliminating the need for periodic testing
■ Meet ISO 9000 and ANSI/
ESD S20.20 test logging
requirements
■ Audible and visual alarms
notify operator of
out-of-limit conditions
■ Easily install on most
equipment or workbench
surfaces
Use this continuous monitor to
ensure that critical ESD generators
conductive, or insulative
Ensure compliance to
ANSI/ESD S20.20-2007
per ESD TR53
Use optional electrodes
for resistance
measurements of
larger surfaces
This portable meter is perfect
for quick checks of surface
resistance for ESD control
applications in electronics
manufacturing or handling
environments. Simply press and
in sensitive areas are effectively
grounded. Unit features green (grounded)
20028-08
hold the test button until the bright
LEDs display the reading level.
Unit features an automatic test
and red (not grounded) LEDs notifying operator of continuous
personal and mat grounding status.
The 4-mm parking snap allows time for the operator to disconnect
the coil cord from the wrist band and park it on this snap. While
parked, the coil cord disables the alarm, allowing the operator to
leave the workstation. Upon returning and removing the coil cord
from the parking snap, the operator has six seconds to hook up to
the wrist band before the alarm sounds.
What’s included: two 6-ft (1.8-m) mat monitor cords, two push-
and-clinch snaps, mounting hardware and brackets, one set of
voltage selector allowing the test
voltage to switch from 10 V to
100 V if the measured resistance
exceeds 1 x 10E5 ohms. Two banana
jacks and an electrode toggle switch
allow for the connection of two
optional external 5-lb electrodes that
measure surface resistance point to
point, or resistance to equipment ground.
What’s included: one 9 V battery and
20028-01
hook-and-loop fasteners, and
NIST-traceable calibration report supplied by the manufacturer.
Specifications
Range: 500 KΩ to 10 MΩ Dimensions (L x W x H):
NIST-traceable calibration report supplied by the manufacturer.
Specifications
Range: 10E3 to 10E12 ohms Power: one 9 V battery
Accuracy: ±1?2 decade Dimensions (L x W x H): 51?4" x 3" x 1"
Alarm response time: <50 ms
Catalog number Description
33?4" x 2" x 1" (9 .5 x 5 x 2 .5 cm)
Power (50/60 Hz)
Price
Display: 10 colored LEDs
Catalog number
Description
(13 .3 x 7 .6 x 2 .5 cm)
Price
SN-20028-08
Continuous static
control monitor
220 VAC
SN-20028-01
Surface resistance checker
ESD Mats
Eliminate static from your work area
SN-20028-03 Test leads, one pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN-20028-05 External electrodes, 5 lb, one pair . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications
Compliance: ANSI/ESD S20 .20
Catalog
Statfree
Dimensions
RTG
number
Benchtop mats
material type (L x W x thickness)
(Ω) Package Price
SN-26809-60? T2, blue
SN-26809-61? T2, gray
48" x 24" x 1?16"
(122 x 61 x 0 .2 cm)
106 to 108
dissipative
Mat kit
SN-26809-62 T2, blue 480" x 24" x 1?16"
side/
Roll
26809-60
26809-61
26809-74
SN-26809-64 T2, gray
SN-26809-63 T2, blue 480" x 36" x 1?16"
SN-26809-65 T2, gray
<104
conductive
side
Roll
Desco mats are available in a variety of materials for your static
control applications and meet ANSI/ESD S20.20 requirements.
Statfree® Type T2 Benchtop Mats have superior heat-, chemical-,
Floor mats
SN-26809-73?
SN-26809-74??
CV
i
72" x 48" x 1?8" 103 to 105 Mat kit
36" x 24" x 1?2" 103 to 105 Mat kit
and wear-resistance. All feature two layers of 100% nitrile
butadiene industrial-grade rubber; the top layer is dissipative and
the bottom layer is conductive. Available in blue or gray, in kit
or roll.
Statfree® Type CV Floor Mat Kit has excellent chemical-resistance,
is humidity independent, and is made of conductive vinyl.
Statfree® Type i Floor Mat Kit interlocks to provide anti-fatigue
properties over large areas. Mat features conductive rubber
construction and an ergonomic dome/support cell structure design.
???Includes ground kit 26809-66 ?Includes ground kit 26809-76
Includes snap kit 26809-68
SN-26809-66 Wrist strap/bench mat common ground kit.
Includes common point 15-ft (4 .6-m) ground cord, resistor with
10-mm snap stud, and universal snap kit 26809-68 . . . . . . . . . . . . . . . . . . . . . . . . . .
SN-26809-68 Universal snap kit. Includes one 10-mm male stud,
one 10-mm female socket, and one long and one short screw . . . . . . . . . . . . . . . . .
SN-26809-76 Floor mat ground kit. Includes 15-ft (4 .6-m) ground cord,
resistor with 10-mm snap stud, and snap kit 26809-68 . . . . . . . . . . . . . . . . . . . . . . .
Compact Static Charge Meters
Static Control
Antistatic, Meters / Blowers / Test Kit
St
Measure the magnitude and polarity of electrostatic fields produced by charged objects
Analog Meter instantly measures static charges. Achieve higher resolution when
measuring below 3000 volts by setting the range selector to LOW setting; measure up to
30,000 volts in the HIGH range simply by multiplying the reading by ten. The “quick zero”
function re-zeros the meter for repetitive measurements.
Digital Meter with Output measures electrostatic fields by increasing the meter to charged
surface distance. Meter features a 31?2-digit, 0.4"H LCD. HOLD button freezes current
reading. Easily zero the meter with the turn of a knob, there is no need to re-zero between
measurements. The output lets you permanently record your results. Order charge plate
detector separately below to verify proper operation of air ionizers and increase meter
sensitivity by a factor of ten.
What’s included: one 9 V battery. Digital meter 37715-70 also includes a carrying case.
Analog meter
17797-30
Leather case
17797-32
Catalog number Type
SN-17797-30 Analog
Range
0 to 30,000 V
Output
—
Dimensions (L x W x H)
43?8" x 25?8" x 13?8" (11 .2 x 6 .7 x 3 .5 cm)
Price
SN-37715-70 Digital 0 .00 to ±19 .99 kV at 1" 10 mV/kV 41?4" x 23?8" x 1" (10 .8 x 6 .1 x 2 .5 cm)
SN-17797-32 Leather case for meter 17797-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN-09376-04 Replacement batteries, 9 V . Pack of 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ionized Air Blowers
Automatically maintain a balanced ion output
Portable Ionized Air Blower is compact, lightweight, and ideal for
field use. Blower features an emitter cassette that slides out for easy
cleaning and replacement. The grounded metal case eliminates
high-voltage fields for greater safety. Airflow output can be adjusted
for greater worker comfort. Visual and audible alarms and
“Clean Me” indicator automatically signal when cleaning and
maintenance are required.
Benchtop Ionized Air Blower emits ions in a true laminar flow
reducing ion recombination and emitter contamination. AC ionizing
system neutralizes static charges at a greater distance while the fixed
temperature heater increases worker comfort. Gold-plated emitters
provide longer service life.
What’s included: NIST-traceable calibration report supplied by the manufacturer
and a 71?2-ft (2.2-m) power cord (on 120 VAC models only).
Catalog number Type Max airflow output Dimensions (W x H x D) Power (50/60 Hz) Price
SN-26809-44 Portable 81?2" x 73?4" x 31?2" 120 VAC
26809-50 Digital meterwith output
37715-70 SN-26809-46
SN-26809-50 Benchtop
77 cfm
117 cfm
(21 .6 x 19 .7 x 8 .9 cm)
11" x 9" x 7"
240 VAC
120 VAC
SN-26809-52
(27 .9 x 22 .9 x 17 .8 cm)
240 VAC
26809-44 SN-26809-48 Replacement emitter cassettes for portable ionized air blower . One pair . . . . . . . . . . . . . . . . . . . . .
Ionization Test Kit
Provides convenience and portability for testing of air ionizers
Use this ionization test kit to conduct regular auditing of air ionization equipment ensuring
compliance. Test kit includes a static field meter to measure the offset voltage (balance)
and charge decay of air ionizers, along with a charger for placing a ±1000 V charge on
the included conductive plate to meet ANSI/ESD SP3.3 standards. System is easy to use;
place the plate assembly on the static field meter, zero the meter, and then begin taking
measurements. Static meter also features a Hold function allowing you to easily read or
save measurements on the screen for later reference.
What’s included: digital static field meter, slide-on conductive plate, charger, data output
cord, carrying case, two 9 V batteries, and NIST-traceable calibration report supplied by
the manufacturer.
Specifications
Range
Low: 0 to ±1 .99 kV / inch
High: 0 to ±19 .99 kV / inch
Catalog number
SN-20028-09
Accuracy
Monitor output: > ±5% of reading
±10 mV; Display: > ±5% of
reading ±2 counts
Description
Ionization test kit
Stability: ±10 counts
Display: LCD
Power: one 9 V battery
Dimensions (L x W x H): 5" x 23?4" x 1"
(12 .7 x 7 x 2 .5 cm)
Price
美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器,美国Desco静电消除器
其它常用设备17797-30/17797-32/26809-50/37715-70的工作原理介绍
其它常用设备17797-30/17797-32/26809-50/37715-70的使用方法?
17797-30/17797-32/26809-50/37715-70多少钱一台?
其它常用设备17797-30/17797-32/26809-50/37715-70可以检测什么?
其它常用设备17797-30/17797-32/26809-50/37715-70使用的注意事项?
17797-30/17797-32/26809-50/37715-70的说明书有吗?
其它常用设备17797-30/17797-32/26809-50/37715-70的操作规程有吗?
其它常用设备17797-30/17797-32/26809-50/37715-70报价含票含运吗?
17797-30/17797-32/26809-50/37715-70有现货吗?
企业名称
上海拜普实业发展有限公司
企业信息已认证
企业类型
信用代码
913101146840722233
成立日期
2009-02-09
注册资本
142
经营范围
一般项目:从事化学科技、计算机科技领域内的技术开发、技术转让、技术咨询、技术服务,市政设施管理,个人商务服务,信息咨询服务(不含许可类信息咨询服务),第一类医疗器械、化工产品(不含许可类化工产品)、实验分析仪器、仪器仪表、气体、液体分离及纯净设备、计算机软硬件及辅助设备(以上软件除电子出版物、音像制品)、办公用品的销售,货物进出口,技术进出口。(除依法须经批准的项目外,凭营业执照依法自主开展经营活动)
上海拜普实业发展有限公司
公司地址
上海市松江区民强路1525号30幢
客服电话