DH3P粘滑试验机

DH3P Stick-slip test bench for examination of material pairs under the action of external materials.

DH3P粘滑试验台外部材料的作用下，材料对检查。

The DH3P was developed specifically for measurements of stick-slip phenomena. External materials are materials that surround or deposit on a material surface and therefore influence the tribological system. Typical examples include oil, grease, fuels and other hydrocarbons as well as cooling liquids, water, paste, dust, etc.

该DH3P是为粘滑现象的测量而开发的。外部材料是包围或在材料表面沉积，从而影响摩擦学系统的材料。典型的例子包括油，润滑脂，燃料等烃以及冷却液体，水，浆料，灰尘等

The test bench enables the systematic measurements and analysis of tribological properties such as static friction, dynamic friction, stick-slip, abrasion and wear.

该试验台能够使系统的测量和摩擦学性能，如静摩擦，动摩擦，粘滑，磨损和磨损的分析。

The effect of external materials on the tribologial properties of materials and components is substantial. Examples are antifriction agents and lubricants used over a wide temperature range in engine technology to reduce wear and improve energy efficiency. The effect of corrosive and wear-increasing media on the abrasion properties an also be quantified by this technology.

外部材料对材料和部件的摩擦性能的影响是巨大的。例子是抗磨剂和用于在宽的温度范围中的发动机技术，减少磨损，提高能效的润滑剂。腐蚀和磨损增加媒体上的磨损性能的效果的同时通过此技术进行定量。

Speed1 – 150mm/s

Contact pressure                 up to 30N

Measuring range for static and dynamic friction 0 – 35N

Linear axis stroke                 up to 200mm

Different test specimen geometries       Possible