此独立设备用于气化液化石油气样品。设计带有用户可调式加热器。一个单独的加热器用
于对 30”(约 76.2 厘米)长,内径为 1/16”的样品管线进行保温,防止样品气化后重新凝
结。This stand-alone unit vaporizes liquefied petroleum gas (LPG) samples. Designed with a
user selectable heater. A separate heater maintains this temperature along a 30 in, 1/16” gas
sample transfer line to prevent condensation after vaporization.
注:溶解了杂质的样品,若该杂质无法气化,那么可能会导致管路的阻塞。产品质保不包
含此种情况下的管路维修工作。Note: Samples that contain dissolved components, which do
not vaporize, may cause an obstruction in the vaporizer tube. The warranty does not cover the
tube assembly under these circumstances.
系统需求 System Requirements:
?
色谱仪需安装气体进样阀 Gas sample valve on the gas chromatograph
?
可用的色谱仪外部连接端口 Available external events port on the gas chromatograph
? 色谱仪上具备可用的阀组位置 Available valve position on the gas chromatograph
?
最低进样压力:300 psig(约 20.7 barg)Minimum sample pressure: 300 psig
特点 Specifications:
? 最高气化温度:150℃ Max vaporizer temperature: 150°C
?
最高液体进样压力:400 psig(约 27.5 barg)*Max liquid sample input pressure: 400
psig*
?
最高气体进样压力:100 psig (约 6.9 barg)Max gas sample input pressure: 100 psig
? 最高驱动气进气压力:65 psig (约 4.5 barg)Max actuation gas input pressure: 65 psig 标气选择阀组能够很简易的安装到气象色谱分析仪上 Selection valve for a gas
calibration blend to be easily ported to the gas chromatograph
*熔融石英内衬管线,用于硫类物质分析 Fused silica lined tubing for sulfur analysis
*闪蒸仪可根据特殊要求进行定制,用于承受最高 1000 psig(约 69.0 barg)的液体进样压
力。Vaporizer can be special ordered to handle up to 1000 psig liquid sample input pressures.
尺寸:宽 x 深 x 高=10”x20”x8”(约 20.3 x 50.8 x25.4 厘米)Dimensions: 10”W x 8”H x
20”D
重量:约 25 磅(约 11.3 公斤)Weight: Approximately 25 lbs
Electrical: Instrument will be built to comply with individual country power requirements.
供电:设备在制造时会按照用户所在国家的电力要求设计符合标准的电源系统。