您好,欢迎访问仪器信息网
注册
誉荣电子科技有限公司

关注

已关注

已认证

粉丝量 0

当前位置: 誉荣电子 (Famouset) > 解决方案 > 启动摩擦力矩测量

启动摩擦力矩测量

2016/07/21 14:30

阅读:127

分享:
应用领域:
交通
发布时间:
2016/07/21
检测样品:
检测项目:
启动摩擦力矩启动扭矩
浏览次数:
127
下载次数:
参考标准:
启动摩擦力矩,启动扭矩

方案摘要:

高精度;匀速电机;可设置测试角度、转速、方向、次数。 光电扭矩传感器,高精度测量轴承的启动摩擦力矩启动扭矩,广泛应用于各种高精密轴承的检测,包括航天轴承,陀螺仪轴承,微电机轴承,精密角接触球轴承,液、气浮轴承,关节轴承,汽车轴承

产品配置单:

分析仪器

美国Vibrac轴承启动摩擦力矩测量仪

型号: BRG 5000

产地: 美国

品牌: Vibrac

¥20万 - 50万

参考报价

联系电话

方案详情:

BRG-3000实现对陀螺仪使用的微型轴承力矩的高精度测试。用于检测轴承表面的质量,检测在预负载时轴承的动态摩擦特性,系统可测量微型轴承的启动力矩以及运转力矩;测出轴承的最大力矩,最小力矩,平均力矩,并绘制力矩-时间曲线、力矩-转角曲线、转速-时间曲线。根据典型力矩轨迹,用以判定轴承单元组件的污染,保持架问题、剥蚀或凹痕、尺寸偏差等缺陷,设计应用有测试数据自动存储、自动生成测试报告的功能。

 

广泛应用于各种高精密轴承的检测,包括航天轴承,陀螺仪轴承,微电机轴承,精密角接触球轴承,液、气浮轴承,关节轴承,汽车轴承

1. 超高精度,最高可达0.0017mN-m

2. 一台设备同时实现启动摩擦力矩和运转摩擦力矩的测量

3. 精密控制伺服电机带有光编码闭环反馈,保证测试过程中尤其是低转速下的匀速运动

4. 产品设计寿命15年,使用寿命15-20年。质保期为验收合格后12个月内,终身负责维修。


下载本篇解决方案:

资料文件名:
资料大小
下载
starttorque1.JPG
102KB
相关仪器

更多

美国Vibrac轴承启动摩擦力矩测量仪

型号:BRG 5000

¥20万 - 50万

真空摩擦磨损计 (VT-3.0)

型号: VT-3.0

¥40万

ASTM G73雨蚀测试系统

型号:ASTM G73雨蚀测试系统

¥20万 - 50万

销盘球盘摩擦磨损试验机

型号:POD 4.0

¥10万 - 50万

相关方案

台阶仪在三维形貌表征领域的应用

Stylus-based surface profiling is a standard technique for accurate, repeatable surface shape, topography and step height measurement in applications ranging from semiconductor R&D to solar cell QC.

2008/12/15

NanoBrook产品应用-12-ZetaPALS

文献名: Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者: Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要:In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词:Bismuth; Nanoparticles; Laser ablation; Cysteine

2015/04/16

城市污水中TOC与COD的关系

TOC与COD的测定方法不同。测定COD是采用强氧化剂和加热回流的方法,只能将水中的有机物部分氧化(氧化率较低),并且测定时间较长,即使目前一些快速的

环保

2017/11/16

植物油中9种抗氧化剂的测定GB5009.32-2016

抗氧化剂是指能防止或延缓食品氧化,提高食品的稳定性和延长贮存期的食品添加剂。GB5009.32-2016《食品安全国家标准 食品中9种抗氧化剂的测定》中采用GPC和C18小柱对食品中9种抗氧化剂进行前处理,该方法回收率低,测试结果不稳定。安谱实验优化了实验方法,用CNW Poly-Sery PSD SPE小柱进行前处理,克服了国标方法的缺点,方法简单,9种抗氧化剂的回收率均在90%以上。

食品/农产品

2019/07/31

誉荣电子科技有限公司

沟通底价

提交后,商家将派代表为您专人服务

获取验证码

{{maxedution}}s后重新发送

获取多家报价,选型效率提升30%
提交留言
点击提交代表您同意 《用户服务协议》 《隐私政策》 且同意关注厂商展位