高温炉VP

Application:  运用
 
-          High temperature furnaces are the ideal choice for sintering special glass, e.g. quartz glass or for melting trials in the laboratory.
 
Description of the construction of the furnace:   主要结构描述
-          frame construction covered with metal plate,
-          框架结构，固定独立的箱体
-          door opening to the side,
-          侧开门
-          furnace cooling by running air by use ventilators,
-          炉内冷却通过电子风扇  
-          heating elements in side walls,
-          加热元件安装在炉壁两侧
-          door equipped with security limit switch,
-          炉门开关带有锁死装置
-          thermocouple of the type „B", placed on the top of furnace chamber,
-          B型热电偶，从电炉顶部插入，便于更换
-          controller INDUSTRY allows saving of 30 control programs in the internal controller memory, each program can consist of up to 15 steps, operator may start the select program on a preset date and time thanks to the installed real time clock.
-          控制器可以储存30个程序，每个程序最多可以设置15个步骤，时钟功能，定时开关。该控制器可以满足任何复杂工艺
-          contactless switching relay,
-          非接触式开关继电器
-          wiring system connected into two phases,
-          两相布线的电力系统
 
Standard equipment of the furnace covers:    标准设备包括
-          controller Industry,
-          INDUSTRY控制器
-          manually door opening to the side.
-          手动侧开门
 
Like an accessories as an extra we are bidding:     可选附件
-          due to unevely load of the power mains (2 phases connection), we offer to connect the input power into 3 phases for extra charge,
-          两阶段电力系统改为三阶段电力系统
-          interface R 232/485,
-          R 232/485连接端口
-          software for the monitoring and the record of the temperature cycle,
-          温度循环记录软件
-          graphic recorder of temperature cycle,
-          温度循环图解记录器
 
 
-          Gas inlet
-          气体输入端口
 
Benefits:   优点
-          attractive design,
-          设计独特
-          top insulating materials (low power consumption, possibility of the fast start on the asked temperature),
-          顶级的绝缘材料（耗电量底，可在要求的温度下迅速启动）
-          independent limit unit protected furnace against destroyed,
-          独立限制单位，避免电炉的不良使用
-          furnace cooling by running air by use ventilators,
-          炉内冷却通电子风扇降温，降温平稳
-          programmable temperature adjustment with the high accuracy,
-          高精度可编程温度调节系统
-          solid state relay (more fluent and silent running, the minimum disturbance of the surrounding mechanism),
-          固态继电器（较流畅和安静运行，因此对周围设施产生的震动极小）
-          perfect workshop processing, the hardware and safety in service.
-          完美的生产工艺，硬件和安全服务
 
 
 

类型	最高温度	内积	外部尺寸        （宽高深）	内部尺寸        （宽高深）	最大输入	正常输入	重量	电压
LAC	°C	L	mm	mm	kW	kW	kg	V
VP 02/16	1600	2	660x680x740	130x150x135	3	3	90	230
VP 04/16	1600	4	660x680x740	130x160x180	3.5	3	100	230
VP 10/16	1600	10	850x1595x775	200x200x250	9	6	290	380
VP 20/16	1600	20	850x1595x775	250x250x310	12	8	315	380
VP 70/16	1600	70	1100x1750x1150	400x300x600	18	14	350	380
VP 02/17	1700	2	660x680x740	130x150x135	3	3	90	230
VP 04/17	1700	4	660x680x740	130x160x180	3.5	3	100	230
VP 10/17	1700	10	850x1595x775	200x200x250	9	6	290	380
VP 20/17	1700	20	850x1595x775	250x250x310	12	8	315	380
VP 70/17	1700	70	1100x1750x1150	400x300x600	18	14	350	380