马弗炉/箱式炉/电阻炉/实验炉 LMH

Laboratory muffle furnaces LMH

马弗炉LMH

Application

Furnaces are used in laboratories for heat-treatment testing of various samples, when the agresive fouling, which would pelt with the spirals, can be formed.

Description of the construction of the furnace:
- frameless conctruction created by the hooped rustless metal plate,
- portal of the door of the fireproof adapting pieces,
- in the peep-hole of the door the protective blue glass,
- door of the hooped rustless metal plate tank shaped ,
- thrust is extrapolated by the ductile springs,
- muffle insulated by the sedge of the mineral grain and cased by the insulation desks,
- door fulfilmed by the insulation desk,
- heating spiral winding-up on the muffle,
- door equiped by the security limit switch,
- feeder cables procurated by the uniphase bolts,
- furnace equiped by the cooling fan,
- controller HT 40AL enables controlling to standard value,
- thermocouple of the type S, placed on the back side
 
Standard equipment of the furnace covers:

- controller HT 40AL
- manualy door opening up

Like an accessories as an extra we are bidding:

-  controller INDUSTRY
-  rotary table
-  interface R 232/485
-  exhaust fan
-  software for the monitoring and the record of the temperature cycle
-  protective atmospher supply
-  calibration of the entry of the measuring controller

Benefits:

-  rustless fulfilment
-  attractive design
-  draught prevenes the devaporation of the vapours at firing and markedly opprobrious the temperature of the mantle
-  perfect lay of the temperature
-  top insulating materials ( low power consumption, possibility of the fast start on the asked temperature )
-  programmable temperature adjustment with the high accuracy
-  solid state relay (more fluent and silent running,the minimum disturbance of the surrounding mechanism )
-  perfect workshop processing,the hardware and safety in service

应用范围：

熔炉被用于实验室不同样品的热处理的测试，并能有效的阻止电热元件在加热过程中受到腐蚀物质的污染。
 
结构描述：

-   炉壳采用优质花纹不锈钢制成
-   电炉入口安装有防火模块
-   门上安装观察孔
-   弹簧助推式上开门
-   门由氧化铝纤维整体模块组成
-   电热丝环绕在马夫炉膛的四周
-   门上安装有断电开关
-   单相的供电电缆
-   电控元件通过电子风扇降温
-   控制器HT40AL 有2个升温段，2个恒温段
-   S型热电偶 

标准设计包括：

-  HT40AL控制器
-  手动的上开门

优点：

-  实现不锈
-  吸引人的设计
-  优良的隔热保温效果，防止炉外壳水蒸汽凝结
-  顶部绝缘材料( 低功率消耗, 在被要求的温度上快速开始的可能性)
-  可编程的高精确度的温度控制
-  固态继电器SSR (流畅和无声的运转, 周围机械装置的最小干扰)
-  完美的车间操作， 硬件和使用中的安全设备

额外收费附件：

-  控制器工业
-  界面R 232/485
-  排气风扇
-  监控软件和温度循环的记录
-  气体保护装置