产品名称: 人胰岛素样因子3(INSL3)ELISA Kit
英文名称: Human insulin-like 3,INSL3 ELISA Kit
货号: CSB-E13909h
规格: 96T
种属: Human
待测物名称: insulin-like 3 (Leydig cell)
缩写: INSL3
反应时间: 1-5h
所需样本体积: 50-100ul
检测波长: 450 nm
用途: For research use only. Not for diagnostic use.
原理 : This assay employs the quantitative sandwich enzyme immunoassay technique. Antibody specific for INSL3 has been pre-coated onto a microplate. Standards and samples are pipetted into the wells and any INSL3 present is bound by the immobilized antibody. After removing any unbound substances, a biotin-conjugated antibody specific for INSL3 is added to the wells. After washing, avidin conjugated Horseradish Peroxidase (HRP) is added to the wells. Following a wash to remove any unbound avidin-enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of INSL3 bound in the initial step. The color development is stopped and the intensity of the color is measured.
特异性: This assay has high sensitivity and excellent specificity for detection of Human INSL3. No significant cross-reactivity or interference between Human INSL3 and analogues was observed.
精密度: Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
样本搜集及储存: Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
检测步骤: Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
结果计算: Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the INSL3 concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
相关产品:
产品名称 英文名称 货号 规格
大鼠胰岛素样因子3(INSL3) ELISA Kit Rat Insulin-Like 3 (INSL3) ELISA Kit CSB-E15850r 96T
Pig Insulin-like 3(INSL3) ELISA kit Pig Insulin-like 3(INSL3) ELISA kit CSB-EL011747PI 96T
Mouse Insulin-like 3(INSL3) ELISA kit Mouse Insulin-like 3(INSL3) ELISA kit CSB-EL011747MO 96T
犬胰岛素样因子3(INSL3) ELISA Kit Dog insulin-like 3 (INSL3) ELISA Kit CSB-E14944c 96T
蛋白
产品名称 货号 规格 蛋白来源
Recombinant Escherichia coli Putative transposase InsL for insertion sequence element IS186C(insL3) CSB-EP011747ENV 1mg E.coli
Recombinant Escherichia coli Putative transposase InsL for insertion sequence element IS186C(insL3) CSB-YP011747ENV 1mg Yeast
Recombinant Callithrix jacchus Insulin-like 3(INSL3) CSB-EP011747CYL 1mg E.coli
Recombinant Callithrix jacchus Insulin-like 3(INSL3) CSB-YP011747CYL 1mg Yeast
Recombinant Bovine Insulin-like 3(INSL3) CSB-EP011747BO 1mg E.coli
Recombinant Bovine Insulin-like 3(INSL3) CSB-YP011747BO 1mg Yeast
Recombinant Mouse Insulin-like 3(Insl3) CSB-EP011747MO 1mg E.coli
Recombinant Mouse Insulin-like 3(Insl3) CSB-YP011747MO 1mg Yeast
Recombinant Human Insulin-like 3(INSL3) CSB-EP011747HU 1mg E.coli
Recombinant Human Insulin-like 3(INSL3) CSB-YP011747HU 1mg Yeast
Recombinant Pig Insulin-like 3(INSL3) CSB-EP011747PI 1mg E.coli
Recombinant Pig Insulin-like 3(INSL3) CSB-YP011747PI 1mg Yeast
人胰岛素样因子3(INSL3)ELISA Kit由上海希美化学有限公司为您提供,货号CSB-E13909h,规格:96T,CAS号:CSB-E13909h,如您想了解更多关于人胰岛素样因子3(INSL3)ELISA Kit价格、人胰岛素样因子3(INSL3)ELISA Kit结构式、批发、用途等信息,欢迎咨询。除供应人胰岛素样因子3(INSL3)ELISA Kit外,还可为您提供大鼠胰岛素样因子3(INSL3)ELISA Kit、犬胰岛素样因子3(INSL3)ELISA Kit、人胰岛素样生长因子2(IGF-2)ELISA Kit等试剂,公司有专业的客户服务团队,是您值得信赖的合作伙伴,上海希美化学客户服务电话,售前、售后均可联系。