产品名称: 人酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit
英文名称: Human acidic fibroblast growth factor,aFGF/FGF-1 ELISA Kit
货号: CSB-E04546h
规格: 96T
种属: Human
待测物名称: fibroblast growth factor 1 (acidic)
缩写: FGF1
检测范围: 62.5 pg/ml-4000 pg/ml
灵敏度: 15.6 pg/ml
反应时间: 1-5h
所需样本体积: 50-100ul
检测波长: 450 nm
用途: For research use only. Not for diagnostic use.
精密度: Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
样本搜集及储存: Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
检测步骤: Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
结果计算: Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the FGF1 concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
相关产品:
产品名称 英文名称 货号 规格
Pig Heparin-binding growth factor 1(FGF1) ELISA kit Pig Heparin-binding growth factor 1(FGF1) ELISA kit CSB-EL008615PI 96T
Sheep Heparin-binding growth factor 1(FGF1) ELISA kit Sheep Heparin-binding growth factor 1(FGF1) ELISA kit CSB-EL008615SH 96T
大鼠酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit Rat acidic fibroblast growth factor,aFGF/FGF-1 ELISA Kit CSB-E07326r 96T
小鼠酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit Mouse acidic fibroblast growth factor,aFGF/FGF-1 ELISA Kit CSB-E07327m 96T
Dog Heparin-binding growth factor 1(FGF1) ELISA kit Dog Heparin-binding growth factor 1(FGF1) ELISA kit CSB-EL008615DO 96T
Chicken Heparin-binding growth factor 1(FGF1) ELISA kit Chicken Heparin-binding growth factor 1(FGF1) ELISA kit CSB-EL008615CH 96T
Bovine Heparin-binding growth factor 1(FGF1) ELISA kit Bovine Heparin-binding growth factor 1(FGF1) ELISA kit CSB-EL008615BO 96T
抗体
产品名称 货号 规格
Rabbit anti-human fibroblast growth factor 1 (acidic) polyclonal Antibody CSB-PA008615GA01HU 150ul
蛋白
产品名称 货号 规格 蛋白来源
Recombinant Mesocricetus auratus Fibroblast growth factor 1(FGF1) CSB-EP008615MRG 1mg E.coli
Recombinant Mesocricetus auratus Fibroblast growth factor 1(FGF1) CSB-YP008615MRG 1mg Yeast
Recombinant Human Fibroblast growth factor 1(FGF1) CSB-EP008615HU 1mg E.coli
Recombinant Human Fibroblast growth factor 1(FGF1) CSB-YP008615HU 1mg Yeast
Recombinant Bovine Fibroblast growth factor 1(FGF1) CSB-EP008615BO 1mg E.coli
Recombinant Bovine Fibroblast growth factor 1(FGF1) CSB-YP008615BO 1mg Yeast
Recombinant Rat Fibroblast growth factor 1(Fgf1) CSB-EP008615RA 1mg E.coli
Recombinant Rat Fibroblast growth factor 1(Fgf1) CSB-YP008615RA 1mg Yeast
Recombinant Mouse Fibroblast growth factor 1(Fgf1) CSB-EP008615MO 1mg E.coli
Recombinant Mouse Fibroblast growth factor 1(Fgf1) CSB-YP008615MO 1mg Yeast
Recombinant Chicken Fibroblast growth factor 1(FGF1) CSB-EP008615CH 1mg E.coli
Recombinant Chicken Fibroblast growth factor 1(FGF1) CSB-YP008615CH 1mg Yeast
Recombinant Pig Fibroblast growth factor 1(FGF1) CSB-EP008615PI 1mg E.coli
Recombinant Pig Fibroblast growth factor 1(FGF1) CSB-YP008615PI 1mg Yeast
Recombinant Dog Fibroblast growth factor 1(FGF1) CSB-EP008615DO 1mg E.coli
Recombinant Dog Fibroblast growth factor 1(FGF1) CSB-YP008615DO 1mg Yeast
人酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit由上海希美化学有限公司为您提供,货号CSB-E04546h,规格:96T,CAS号:CSB-E04546h,如您想了解更多关于人酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit价格、人酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit结构式、批发、用途等信息,欢迎咨询。除供应人酸性成纤维细胞生长因子(aFGF/FGF-1)ELISA Kit外,还可为您提供Recombinant Human FGF-1(重组人成纤维细胞生长因子-1)、Recombinant Human FGF-1 Sf9(重组人成纤维细胞生长因子-1 Sf9)、Recombinant Mouse FGF-1(重组小鼠成纤维细胞生长因子-1)等试剂,公司有专业的客户服务团队,是您值得信赖的合作伙伴,上海希美化学客户服务电话,售前、售后均可联系。