产品名称: 人β1肾上腺素能受体(β1AR)抗体ELISA Kit
英文名称: Human anti-β1-adrenergic receptor(β1AR) autoantibody ELISA Kit
货号: CSB-E15079h
规格: 96T
种属: Human
待测物名称: anti-β1-adrenergic receptor(β1AR) autoantibody
样本类型: serum
反应时间: 1-5h
所需样本体积: 50-100ul
检测波长: 450 nm
用途: For research use only. Not for diagnostic use.
精密度: Intra-assay Precision (Precision within an assay): CV%<8%
Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10%
Three samples of known concentration were tested in twenty assays to assess.
样本搜集及储存: Serum: Use a serum separator tube (SST) and allow samples to clot for two hours at room temperature or overnight at 4°C before centrifugation for 15 minutes at 1000 ×g. Remove serum and assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
Plasma: Collect plasma using EDTA, or heparin as an anticoagulant. Centrifuge for 15 minutes at 1000 ×g at 2-8°C within 30 minutes of collection. Assay immediately or aliquot and store samples at -20°C or -80°C. Avoid repeated freeze-thaw cycles.
检测步骤: Bring all reagents and samples to room temperature before use. Centrifuge the sample again after thawing before the assay. It is recommended that all samples and standards be assayed in duplicate.
1. Prepare all reagents, working standards, and samples as directed in the previous sections.
2. Refer to the Assay Layout Sheet to determine the number of wells to be used and put any remaining wells and the desiccant back into the pouch and seal the ziploc, store unused wells at 4°C.
3. Add 100μl of standard and sample per well. Cover with the adhesive strip provided. Incubate for 2 hours at 37°C. A plate layout is provided to record standards and samples assayed.
4. Remove the liquid of each well, don't wash.
5. Add 100μl of Biotin-antibody (1x) to each well. Cover with a new adhesive strip. Incubate for 1 hour at 37°C. (Biotin-antibody (1x) may appear cloudy. Warm up to room temperature and mix gently until solution appears uniform.)
6. Aspirate each well and wash, repeating the process two times for a total of three washes. Wash by filling each well with Wash Buffer (200μl) using a squirt bottle, multi-channel pipette, manifold dispenser, or autowasher, and let it stand for 2 minutes, complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining wash Buffer by aspirating ordecanting. Invert the plate and blot it against clean paper towels.
7. Add 100μl of HRP-avidin (1x) to each well. Cover the microtiter plate with a new adhesive strip. Incubate for 1 hour at 37°C.
8. Repeat the aspiration/wash process for five times as in step 6.
9. Add 90μl of TMB Substrate to each well. Incubate for 15-30 minutes at 37°C. Protect from light.
10. Add 50μl of Stop Solution to each well, gently tap the plate to ensure thorough mixing.
11. Determine the optical density of each well within 5 minutes, using a microplate reader set to 450 nm. If wavelength correction is available, set to 540 nm or 570 nm. Subtract readings at 540 nm or 570 nm from the readings at 450 nm. This subtraction will correct for optical imperfections in the plate. Readings made directly at 450 nm without correction may be higher and less accurate.
结果计算: Using the professional soft "Curve Expert 1.3" to make a standard curve is recommended, which can be downloaded from our web.
Average the duplicate readings for each standard and sample and subtract the average zero standard optical density.
Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the x-axis against the concentration on the y-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the β1AR autoantibody concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data.
If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
相关产品:
产品名称 英文名称 货号 规格
人分泌型卷曲相关蛋白1(SFRP1) ELISA Kit Human Secreted Frizzled-Related Protein 1(SFRP1) ELISA Kit CSB-E15074h 96T
人伤寒(ST)抗体(IgM)ELISA kit Human salmonella typhi (ST) antibody (IgM) ELISA kit CSB-E15070h 96T
大鼠单胺氧化酶(MAO) ELISA Kit Rat monoamine oxidase(MAO) ELISA Kit CSB-E15076r 96T
猪I型胶原蛋白ELISA Kit Pig Collagen-like Bioprotein I(RCB I) ELISA Kit CSB-E15071p 96T
大鼠叉头框蛋白P3(FoxP3) ELISA Kit Rat Forkhead Box P3(FOXP3) ELISA Kit CSB-E15075r 96T
绵羊铜蓝蛋白(CP)ELISA Kit Sheep Ceruloplasmin(CP) ELISA Kit CSB-E15078Sh 96T
牛可溶性CD8(sCD8) ELISA Kit Bovine soluble cluster of differentiation 8(sCD8) ELISA Kit CSB-E15077B 96T
更多
更多
企业名称
上海希美化学有限公司
企业信息已认证
企业类型
信用代码
310228001203103
成立日期
2009-05-31
注册资本
10
经营范围
化工原料及产品(除危险化学品、监控化学品、烟花爆竹、民用爆炸物品、易制毒化学品),实验室设备,仪器仪表,金属制品,电子产品,机电产品销售,从事化工科技、计算机科技领域内技术开发、技术咨询、技术服务。【依法须经批准的项目,经相关部门批准后方可开展经营活动】
上海希美化学有限公司
公司地址
上海市松江区陆家圈路168弄113号
客服电话