Features
Altitude simulation up to 200,000 feet
Temperature range from -80° C to +200° C
Humidity range from 20% to 98% in the dry bulb range of +20° C to +85° C, limited by a 3° dew point
Flexible panelized modular design permits future expansion or relocation
If application requires, welded, unitized construction
Modular panels consist of aluminum stainless clad 4" foam polyurethane insulation
Floors are 16 ga. Galvanized steel, designed to support 500 pounds per square foot.
Rooms are precision-engineered to provide maximum airflow uniformity
设备特点:
高度模拟至200,000英尺
温度范围:-80 ?C~+200 ?C
湿度范围:20%~98%(干球温度计+20 ?C~+85 ?C,3 ?C露点温度限制)
灵活的组合标准设计可实现将来的扩展或重新布置
如果用户申请要求,可制成焊接组合结构
标准面板为镀铝材料和4英寸聚亚安酯发泡绝缘材料组成
地板为16ga.镀锌板,设计承重能力为每平方英尺承重500磅
室内为精确结构设计保证最佳的气流均匀度
Options:
IEEE interface
LinkTenn software that permits your computer to control up to 10 chambers
RS422, 423, 232, or 485 interface assemblies
Humidity water demineralizer cartridge system
Viewing window, thermally insulatedheated
Interior lighting
Shelving
Alternate power supply wiring
Automatic CO2 or LN2 cooling boost system
Ports, custom shapessizes
Thermocouple or electrical feed-through terminals
Special connectors
GN2 purge system
Refrigeration tapspressure gauges
Remote console for instrumentation
Recording instruments
Redundant thermal protectionalarm system
External dryer for obtaining humidity as low as 5% (to 20°C)
Floor coverings
Ramps
Custom door sizes
Electrical outlets
Unitized construction
Explosion resistant designs
Variable air velocity
Emergency exit provisions
设备可选功能:
IEEE界面;
LinkTenn软件使您的电脑可控制达10台设备;
RS422, 423, 232 或 485界面的集成;
软水器
观察窗,绝热,可加热;
内置照明灯;
载物板;
备用电源线;
自动CO2或LN2制冷推进系统;
通讯接口,可定制形状和尺寸;
热电偶或电子引线端子;
专用连接器;
GN2净化系统;
制冷故障报警和压力表;
仪表远距离控制台;
记录仪;
双重温度保护和报警系统;
外部干燥机可实现湿度低至5%(20度时);
地板覆盖材料;
斜坡;
定制大门尺寸;
电器插座;
组合结构;
防爆设计;
可变气流速度;
预备紧急出口。