高压发生器

• Voltage and Current Outputs continuously adjustable from 0 to full scale
• Low stored energy
• High Efficiency
• Total protection against arcs, overloads and short circuits
• Customized V and C full scales* with no extracost
• V & C Setting and Monitoring from front panel or REMOTE
• High precision regulation
• Remot, Inhibit & Interlock functions
• High reliability
• Compact design
• Double Resonance Technology (ZVC)
• Automatic crossover
• Over Current Limitation and Protection functions
• Polarity display
• Safety switch key
• Master-slaves architecture

* You can choose your own full scales (Vmax and Imax) even if these values are not available in standard. For example, you can get a 15 000 V generator based on 30 000 W model. In this case, you will get an Output Voltage adjustable from 0 to 15 000 V and an Output Current from 0 to 2 A.

• Output Voltage and Output Current:
Both Voltage Output and Current Output are continuously adjustable from 0 to 100 % (full scale).
In local mode: by using 10 turns potentiometers resolution 0.05%
In remote mode: by an external 0 to 10 V


• Voltage regulation
Load Regulation: ±0.05 % of full voltage (for 0 - 100 % load); ±0.01% available on request.
Line Regulation :±0.05 % of full voltage ( for Main Voltage ±10 %); ±0.01% available on request.


• Current regulation:
Load Regulation: ± 0.05 % (for 0 to 100 % load change)
Line Regulation: ± 0.05 % (for Main Voltage ± 10 %)


• Ripple + Noise:
0.1 % p-p

• Setting Time:
< 100 ms typical,, 10 ms available on request

• Stability (after one hour warm-up):
0.01 % / hour, 0.03 % after / 8 hours of operating with constant load and ambiant temperature.


• Temperature Coefficient:
100 ppm/°C


• Operating Temperature:
from 0 to 40°C


• Efficiency:
> 92 % full load


• Recovery Time After Arc:
< 1 mS


• Stored Energy:
1J / kW


• Cooling by air:
Dust filter fans on front panel. Easily removable filters for cleaning.


• Main Voltage:
400 VAC ± 10 % 47 − 63 Hz 3 Phases + Earth


• Power factor:
> 0.98

• Inrush current:
limited to full power operating current

• Calibration:
with probes periodically approved by Authorized Measurement Laboratories