二氧化氮检测仪

The Model 401 NO2 Converter (above photo, top), when used in combination with the Model 400 (above photo, bottom) or Model 410 Nitric Oxide Monitor, allows measurements of NO, NOx (NOx = NO + NO2) and NO2 (as the difference between NOx and NO) in the range 2-2,000 ppb. The NO2 Converter also contains an internal scrubber for scheduled zeroing of the NO Monitor. The NO2 Converter makes use of a molybdenum ("moly") converter heated to 325 °C to reduce NO2 to NO. Frequencies of switching between NO and NOx measurements and zeroing frequencies are chosen from the NO Monitor menu. The instrument package may be set to either always measure NO, always measure NOx, or switch back and forth between measurements of NO and NOx at a specified interval (5 min, 15 min or 1 hour). Choices of zeroing frequency are never, continuous, and at 30 min, 1 hour and 4 hour frequencies. Menu choices of NO/NOx and zero measurement frequencies can be customized to your needs.

NO2 Conversion Principle :Molybdenum Oxide at 325 °C
Dimensions of Instrument Case: 3.8 x 7.5 x 9.5 in. (10 x 19 x 24 cm)
Weight :4.9 lb. (2.2 kg)
Power: (specify 110 or 220 VAC) 60 Watt (max); ~30 Watt after warmup
Sample Flow Rate :1 L/min
NO/NOx Sampling Interval Choices: Always NO, Always NOx, 5 min, 15 min, 1 hr
(can be customized to your needs)
Zeroing Frequency Choices :Always Off, Always On, 30 min, 1 hr, 4 hr
(can be customized to your needs)

The Model 401 NO2 Converter (above photo, top), when used in combination with the Model 400 (above photo, bottom) or Model 410 Nitric Oxide Monitor, allows measurements of NO, NOx (NOx = NO + NO2) and NO2 (as the difference between NOx and NO) in the range 2-2,000 ppb. The NO2 Converter also contains an internal scrubber for scheduled zeroing of the NO Monitor. The NO2 Converter makes use of a molybdenum ("moly") converter heated to 325 °C to reduce NO2 to NO. Frequencies of switching between NO and NOx measurements and zeroing frequencies are chosen from the NO Monitor menu. The instrument package may be set to either always measure NO, always measure NOx, or switch back and forth between measurements of NO and NOx at a specified interval (5 min, 15 min or 1 hour). Choices of zeroing frequency are never, continuous, and at 30 min, 1 hour and 4 hour frequencies. Menu choices of NO/NOx and zero measurement frequencies can be customized to your needs.