Significant Improvement of LiNi0.8Co0.15Al0.05O2 Cathodes at 60°C by SiO2 Dry Coating for Li-Ion Batteries
2014-01-06 15:31
浏览:608次
分享:
资料摘要:
研究领域:锂离子电池电极材料 交流阻抗频率范围:5000Hz - 0.1Hz
The cycling performance of a LiNi0.8Co0.15Al0.05O2 cathode at 60°C was substantially improved by direct SiO2 dry coating. The
SiO2-coated cathode was obtained from firing of the mixture consisting of SiO2 nanoparticles and the cathode powders with a
weight ratio of 99:1 at 700°C for 5 h. The first discharge capacity of the coated cathode was 172 mAh/g, whereas the uncoated one
showed 182 mAh/g at 60°C. However, the coulombic efficiency of the coated sample was 95%, which was 2% higher than that
of the uncoated sample. Moreover, the discharge capacities of the coated cathode at 60°C was about 2.5 times larger than those
of the uncoated sample at rates of 0.5 and 1C, showing 146 and 109 mA/g, respectively. This capacity improvement at 60°C is
related to the fact that the highly distributed Si element near the surface, as a type of solid solution with LiNi0.8Co0.15Al0.05O2,
diminishes the side reactions of the cathode and electrolyte at 60°C.
下载本篇资料:
13ignificantmprovementofii0.8o0.15l0.052athodesat60byi2ryoatingforionatteries.pdf
493KB
相关资料
Investigation on photovolatic performance of hollow sphere/nanoparticle composite TiO2 electrodes for solid state dye sensitized solar cells.
Dynamic Response of Charge Transfer and Recombination at Various Electrodes in Dye-sensitized Solar Cells
Investigated Using Intensity Modulated Photocurrent and Photovoltage Spectroscopy.
Nature SR-JLU-Integrated Solid-Nanoporous Copper-Oxide Hybrid Bulk Electrodes for High-performance Lithium-Ion Batteries
Performance of non-porous graphite and titanium-based anodes in microbial fuel cells
Influence of CO2 on ionic conductivity of anion
exchange membrane for alkaline DMFCs