仪器简介:Rheoline Autotester MDR
The cost effective instrument uses Prescott Instruments' patented belt system to convey the rubber samples into the test chamber and then remove them once the test has been carried out.
The operator has the simple task of placing the sample in one of the clearly defined loading slots (shown below) and with one keystroke on the PC the test is preformed, the data calculated and the results automatically graded as a pass or fail.
技术参数:Rheoline Autotester MDR
Technical Specifications:
Standard: Conforms to ISO No. 6502 / ASTM D5289
Sample Capacity: 4 samples
Electrical: Single Phase, 220 / 240v 50Hz, or 110v 60Hz
Pneumatics: Filtered Air 4.2 Kg/cm² ( 6OPSI )
Cavity Configuration: Sealed or non sealed die system
Oscillation Frequency: 1.67 Hz
Oscillation Amplitude: 0.5°, 1.0°, 3.0°. (0.5° fitted as standard)
Temperature Control: Digital PID
Temperature Range: 30° to 250°C
Torque Units: In/Lbs or dNm
Temperature Units: Celsius or Fahrenheit
Pressure Units: Lb/In² or Kg/cm² (optional)
Time Units: Min/Seconds or Minutes/Decimal
Real Time Graphical Output: Elastic Modulus, Viscous Modulus, Tan Delta,Cure Rate, Pressure in Die cavity
(optional)
PC Specification: Pentium processor, Fully Networkable
Data Format: All data stored in accessible format allowing easy export to all other packages.
Optiona l Extras Available: Programmable temperature zones
Additional oscillation eccentric
Pressure transducer
Auto loading module (see Automated Rheo-Line Moving Dir Rheometer)
MDR Sample Cutter
主要特点:Rheoline Autotester MDR
The cost effective instrument uses Prescott Instruments' patented belt system to convey the rubber samples into the test chamber and then remove them once the test has been carried out.
The operator has the simple task of placing the sample in one of the clearly defined loading slots (shown below) and with one keystroke on the PC the test is preformed, the data calculated and the results automatically graded as a pass or fail.