微型注塑机

All Electric High Precision Micro Injection Moulding Machine

Features:
All-electric micromolding machine 
Unique reciprocating barrel design 
Ultra-quiet operation 
Small footprint 
Uses 120 or 240 volt single phase power source (tailored to customers requirements) 
Very low energy consumption 
Omron PLC touch-screen control 
Data port for exporting processing information 
Processes standard sized pellets 
Rugged 4 tie bar construction 
Cleanroom ready 

All Electric High Precision Injection Moulding Machine

SPECIFICATION:

High Force 5 MICRO injection moulding machine

Clamping force: kN 50
Opening force: kN 25
Distance between tie bars: mm 164
Tool size (maximum h x w x d): mm 200 x 160 x 156
Mould height (minimum): mm 100
Opening stroke: mm 140
Maximum daylight between platens: mm 315
Ejector stroke(maximum): mm 78
Ejector force: kN 35
Screw diameter: mm 20
Injection stroke (maximum): mm 24
Theoretical injection volume: cc 9
Maximum shot weight (Polystyrene): g 10
Screw speed: rpm 0 – 140
Screw torque: Nm 59
Electrical requirements: 200/240 V – 1 Ph – 50/60 Hz
Electrical current: A 13

Construction:

SCREW DRIVE: AC totally enclosed motor connected to a compact,
precision helical bevel gearbox

SCREW SPEED AC flux vector converter
CONTROL:

SCREW POSITION CONTROL: Linear position sensor accurate to 0.01 mm
PLASTICISING SCREW: Short pitch profile for controlled mixing/melting
High-strength alloy steel, nitrided
Fitted with replaceable screw tip and check ring

BARREL: Precision honed bore
High-strength alloy steel, nitrided
2-zone electric heating via band heaters
Type J control thermocouples
Feed block cored for cooling

TEMPERATURE CONTROL: 3-term P.I.D. control
Solid-state switching
Temperatures set from touchscreen

TIE BARS: High tensile steel, cylindrically ground

LINEAR BEARINGS: Plain bearings with integral lubrication
Maintenance-free

MOULD CLAMP: Toggle type with plain bearings and hardened
steel pivot shafts

CLAMP DRIVE: Precision ball screw driven by AC totally enclosed
motor connected to a helical gearbox

CLAMP/INJECTION SPEED CONTROL: AC flux vector inverter

CLAMP/INJECTION
POSITION CONTROL: Linear position sensor accurate to 0.01 mm

INJECTION NOZZLE: Easily removable
Various styles available, ‘open’ or ‘shut-off’ type:
- Heated
- Unheated
- Taper nozzle
- Flat nozzle
- Radius nozzle

EJECTOR: Adjustable ejector strike pin to suit spring-loaded
in-mould ejector systems

FRAME: Heavy duty steel, welded and painted

CONTROLS: PLC control
Touch-screen H.M.I.

DIMENSIONS: Width 1340 mm
Depth 760 mm
Height 1400 mm

WEIGHT: 350 kg

All Electric High Precision Micro Injection Moulding Machine

The HIGH FORCE series of all electric injection moulding machines has been developed to meet the needs of moulders with a wide range of applications. They offers a unique concept with features enabling the production of small "Mini & Micro Mouldings"

Due to the compact design, single phase electrical supply and low cooling requirements, HIGH FORCE series injection moulding machines can be installed on a suitable bench in any required location and are especially convenient where mouldings are required to compliment other production processes.

With the choice of control via a simple LCD Function Display or Colour Touch Screen setting, the specification can be tailored to suit individual customer requirements.