2022/09/16 16:16
阅读:105
分享:方案摘要:
产品配置单:
高低温湿热试验箱 湿热试验箱 高低温湿热箱 湿热箱
型号: GDS- 100
产地: 北京
品牌: 雅士林
¥0 - 5万
参考报价
联系电话
恒温恒湿试验室 步入式恒温恒湿试验室 恒温试验室
型号: 北京恒温恒湿试验室
产地: 北京
品牌: 雅士林
¥10万 - 20万
参考报价
联系电话
恒温恒湿试验箱 恒温恒湿试验箱 恒温恒湿箱型号
型号: DHS- 100
产地: 北京
品牌: 雅士林
¥1万 - 5万
参考报价
联系电话
臭氧老化试验箱 臭氧老化机 臭氧试验箱 臭氧检测仪
型号: QL-100
产地: 北京
品牌: 雅士林
¥10万 - 20万
参考报价
联系电话
高低温交变试验箱 高低温交变试验箱 高低温交变试验箱
型号: GDW -225
产地: 北京
品牌: 雅士林
面议
参考报价
联系电话
高低温试验箱 高低温交变试验箱 高低温箱 高低温机
型号: GDW- 100
产地: 北京
品牌: 雅士林
¥0 - 5万
参考报价
联系电话
盐雾试验箱 盐雾试验箱型号 盐雾试验箱
型号: YWX/Q- 150
产地: 北京
品牌: 雅士林
¥2万 - 5万
参考报价
联系电话
方案详情:
上回,小编通过GB/T27739-2011的标准,给大家科普了电子秤做温度试验的方法,今天给大家带来的是湿热稳态试验的方法,供大家在为准备试验做参考。如过需要了解更详细的试验步骤,可以直接联系我们。
电子秤的湿热稳态试验方法要求如下:
一、试验载荷:对于不按特定的要求进行静态或动态称重的衡器,在非自动(静态)运行中使用五个不同的试验载荷。
二、EUT的条件:在高低温湿热试验箱内正常通电并且通电时间大于或等于生产厂规定的预热时间,通电持续整个试验过程。
三、置零和零点跟踪功能应在正常运行情况下有效。在试验前将EUT调整到尽可能接近于零点示值。EUT上不应出现凝露。
四、稳定:在标准温度和50%的湿度下,保持3h。在相关规定的温度上限,保持2d。
五、温度:标准温度(20℃或温度范围的平均值(当20℃不在温度范围内时))以及相关规定的温度上限。
六、温度/湿度48h时序(至少一个周期):
a)标准温度20℃,相对湿度为50%;
b)温度上限,相对湿度为85%;
c)标准温度20℃,相对湿度为50%。
下载本篇解决方案:
更多
台阶仪在三维形貌表征领域的应用
Stylus-based surface profiling is a standard technique for accurate, repeatable surface shape, topography and step height measurement in applications ranging from semiconductor R&D to solar cell QC.
2008/12/15
YSI防玷污的10个技巧
YSI 防玷污的10点技巧 随着电子技术的进步、电源管理的改进和电池寿命的延长,生物玷污成为目前决定监测仪器投放周期长度的决定因素,特别是应用于长期、连续监测。应用一些防玷污技术可以延长仪器的维护间隔,能够减少野外的仪器维护的次数,并提高水质监测数据精度。 防玷污技巧的详细内容请参考文章《YSI 防玷污的10点技巧》
环保
2014/03/04
NanoBrook产品应用-12-ZetaPALS
文献名: Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者: Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要:In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词:Bismuth; Nanoparticles; Laser ablation; Cysteine
2015/04/16
4D-脂质组学高通量工作流程
Lipid profiling from complex lipid extracts can be a challenging and time consuming task. The high complexity of samples and co-elution of isobaric or isomeric compounds complicate the confident annotation of lipids. The presented 4D-Lipidomics workflow simplifies and streamlines the annotation and validation process using mobility-enhanced MS data.
医疗/卫生
2021/03/05