2022/06/21 16:55
阅读:97
分享:方案摘要:
产品配置单:
高低温试验箱 高低温交变试验箱 高低温箱 高低温机
型号: GDW- 100
产地: 北京
品牌: 雅士林
¥0 - 5万
参考报价
联系电话
盐雾试验箱 盐雾试验箱型号 盐雾试验箱
型号: YWX/Q- 150
产地: 北京
品牌: 雅士林
¥2万 - 5万
参考报价
联系电话
恒温恒湿试验箱 恒温恒湿试验箱 恒温恒湿箱型号
型号: DHS- 100
产地: 北京
品牌: 雅士林
¥1万 - 5万
参考报价
联系电话
高低温交变试验箱 高低温交变试验箱 高低温交变试验箱
型号: GDW -225
产地: 北京
品牌: 雅士林
面议
参考报价
联系电话
大型高低温步入试验室 大型步入试验室 环境步入试验室
型号: 详情客服
产地: 北京
品牌: 雅士林
¥10万 - 20万
参考报价
联系电话
高低温湿热试验箱 湿热试验箱 高低温湿热箱 湿热箱
型号: GDS- 100
产地: 北京
品牌: 雅士林
¥0 - 5万
参考报价
联系电话
振动试验机 垂直振动试验台 大型振动试验机
型号: LD-ATP
产地: 北京
品牌: 雅士林
¥1 - 5万
参考报价
联系电话
方案详情:
键鼠就是键盘鼠标套装,常见的有无线连接和有线连接两种连接方式。微软的键鼠上市时间较早,技术也相对成熟,受到了广大消费者的喜爱。为确保键鼠长时间使用的质量和可靠度能通过各种试验找出问题,并解决这一系列问题当中的方案。那么是能够通过使用高低温试验箱或是恒温恒湿试验箱测试出不同温度的范围。
一、目的:建立和规范键鼠成品环境温湿度可靠性测试的方法与流程,以确保检验结果的准确性。
二、试验项目:
1、高温存储试验
A.将键鼠放置于测试专用高低温试验箱里,温度设置65±2℃,湿度93%RH,存放时间72H。
B.测试完成,将样品从高低温试验箱取出放置于常温下恢复2H后测试其功能是否正常。
2、低存储试验
A.将样品放置于测试专用高低温试验箱里,温度设置-40℃,存放时间72H。
B.测试完成,将键鼠从高低温试验箱里取出放置于常温下恢复2H后测试其功能是否正常。
3、温度冲击试验
A.将样品放置于测试专用温度冲击试验箱里,温度设置-40℃,存放时间2H。
B.在一分钟内将样品放置于测试专用温度冲击试验箱内,温度设置65℃,存放时间2H。
C.将上述测试循环做5次,测试完成后测试其样品功能是否正常。
4、高温操作试验
A.将样品放置于专用高低温试验箱内,温度设置65℃,DC5.0V±5%,保持时间2H。
B.测试完成将样品置于常温下恢复2H后测试其功能是否正常。
5、低温操作试验
A.将样品放置于专用高低温试验箱内,温度设置-40℃,DC5.0V±5%,保持时间2H。
B.测试完成将样品置于常温下恢复2H后测试其功能是否正常。
6、高温高湿操作试验
A.将样品放置于专用恒温恒湿试验箱内,温度设置65℃,DC5.0V±5%,湿度93%RH,保持时间2H。
B.测试完成将键鼠置于常温下恢复2H后测试其功能是否正常。
下载本篇解决方案:
更多
YSI防玷污的10个技巧
YSI 防玷污的10点技巧 随着电子技术的进步、电源管理的改进和电池寿命的延长,生物玷污成为目前决定监测仪器投放周期长度的决定因素,特别是应用于长期、连续监测。应用一些防玷污技术可以延长仪器的维护间隔,能够减少野外的仪器维护的次数,并提高水质监测数据精度。 防玷污技巧的详细内容请参考文章《YSI 防玷污的10点技巧》
环保
2014/03/04
NanoBrook产品应用-12-ZetaPALS
文献名: Structural, morphological and optical properties of Bi NPs obtained by laser ablation and their selective detection of L-cysteine 作者: Ramon Gabriel Teixeira Rosaa, Celso de Araujo Duartea , Wido Herwig Schreinera, Ney Pereira Mattoso Filhoa, Arandi Ginane Bezerra Jr.b, Andersson Barisonc, Fernanda Maria Marins Ocamposc a Departamento de Física, Universidade Federal do Paraná Centro Politécnico, CP 19044, 81531-990 Curitiba (PR), Brazil b Departamento Acadêmico de Física, Universidade Tecnológica Federal do Paraná, 80230-901 Curitiba (PR), Brazil c Departamento de Química, Universidade Federal do Paraná Centro Politécnico, CP 19081, 81531-990 Curitiba (PR), Brazil 摘要:In the present work we show the results of the investigation of the properties of bismuth nanoparticles (NPs) obtained by the laser ablation in water. The samples were characterized by various techniques: UV/vis spectroscopy, dynamic light scattering, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, nuclear magnetic resonance and zeta potential. The NPs were metallic and surface oxidated, exhibiting absorption peak at 257 nm due to the surface plasmon resonance. The interaction between the NPs and various amino acids was studied and revealed a selective sensibility to cysteine on a range of concentration from 80 to 720 μM, which we attribute to a dimerization of cysteine to cystine probably complexed to the nanoparticle surface by electrostatic interactions, leading to the modification of the NP absorption spectrum. 关键词:Bismuth; Nanoparticles; Laser ablation; Cysteine
2015/04/16
双相不锈钢的增强纳米压痕应用
Using Bruker’s Hysitron PI 88 SEM PicoIndenter equipped with tilt and rotation stages in conjunction with the QUANTAX EBSD system enables a more robust characterization of metallic materials by combining high resolution phase and grain orientation mapping capabilities with targeted nanomechanical property measurements. This combination could also be used to extend the scope of research related to other advanced textured, anisotropic, or multi-phase materials.
钢铁/金属
2021/09/02
Thermo Scientific Orion 8030cX 二氧化硅分析仪
二氧化硅是用于检测、控制和尽量减少涡轮机、换热器和锅炉结垢的一种关键度量。在线实时测量活性二氧化硅可尽量降低因结垢而产生的维修/更换成本,实现安全高效的长期运行,这款在线二氧化硅分析仪可用于对二氧化硅超标的生产用水的去除或回收进行即时或自动的决策。连续实时二氧化硅监测可快速通知离子交换树脂的RO穿透或饱和情况,从而使系统效率最大化,尽量减少维修停机时间。Orion 8030cX 在线二氧化硅分析仪可配置为在二氧化硅峰值出现时发送警告/警报或测量数据来警告用户,触发纠正措施,防止下游出现问题。
环保
2021/09/29