泊睿BR-PV-THD热循环-湿热-湿冻试验箱

★ 技术参数 
☆ 温度范围： 
   A型：-20℃～+100℃（+150℃）
   B型：-40℃～+100℃（+150℃）
   C型：-60℃～+100℃（+150℃）
   D型：-70℃～+100℃（+150℃） 
☆ 温度波动度：±0.5℃ 
☆ 温度均匀度：±2.0℃ 
☆ 湿度范围：30%～98%R.H  
☆ 湿度误差：+2/-3%R.H 

★ 型号及工作室尺寸(D×W×H)(mm) 
   GDJ-100 400×450×550 
   GDJ-150 500×500×600 
   GDJ-225 500×600×750 
   GDJ-400 600×800×850 
   GDJ-800 800×1000×1000 
   GDJ-1000 1000×1000×1000 
   GDJ-1500 1500×1000×1000

BR-PV-THD Thermal Cycling, Humidity-Freeze, Damp-Heat Tester

 

Thermal Cycling Test
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “TC200 thermal cycling test, TC50 thermal cycling test”, and UL 1703-2008 “temperature cycling test”.
1. IEC 61215 Ed.3, IEC 61646:2008 test condition:
The temperature of modules between -40°C±2°C and +85°C±2°C cycling, the rate of change of temperature between the low and high extremes shall not exceed 100°C/h and the module temperature shall remain stable at each extreme for a period of at least 10 min. The cycle time shall not exceed 6h.
2. UL 1703-2008 test condition:
The temperature of modules between -40°C±2°C and +90°C±2°C cycling, the instantaneous rate of temperature change of the test chamber with respect to time is not to be greater than 120°C/h.
 
Humidity-Freeze Test
Implementation of standards:
IEC 61215 Ed.3, IEC 61646:2008 “humidity-freeze”, UL 1703-2008 “humidity test”
The temperature of modules between -40°C±2°C and +85°C±2°C cycling.
Relative humidity 85%RH±5% at 85°C in IEC 61215 and 61646, but UL 1703 Control in 85%RH±2.5% at 85°C, allowable deviation range different.
 
Damp-Heat Test
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “damp-heat test”
Test temperature 85°C ± 2°C, Relative humidity 85% ± 5%, Test duration 1000h
 
Electrical continuity, Insulation continuity, Grounding continuity test system:
Implementation of standards: IEC 61215:2005 & Ed.3, IEC 61646:2008 “electrical continuity for TC200 thermal cycling test and humidity-freeze test” condition, and UL 1703-2008 “Insulation continuity and grounding continuity” condition.
DC power current / voltage output: ≥10A / 50V