电导率仪（适合于有机物）

1152型数字电导率仪提供了一种符合ASTM D2624标准要求的液体电导率测试方法，电导率值以pS/m为单位。仪器杰出的机电设计可方便地使用于实验室和工业生产中。基于安全原因，本仪器首先用于烃类燃料特别是航空燃料的电导率测定，在改进后被大量应用于其他液体电导率的测定。

Range:     0 - 1999 pS/m
Resolution:       1 pS/m
Accuracy:           2% of reading ?1 pS/m
Over-Range Indicator:              "1" on left side of display
Calibration:                     Internal source, field adj.
Controls:                            2 Pushbuttons, "M" (measure) & "C" (calibration)
Display:               Liquid crystal, 3 ?digits, ?inch (.27 cm) high
Safety Ground:                     Banana jack on electronics assy.
Power:                              Battery,    3 each, 6 volt alkaline
Op Temp Range:           32?to 165?F (0?to 75?C)
Carrying Case:               Hard, solvent resistant, molded plastic

测量范围0～1999pS/m

分辨率:1pS/m

精度：2%（测量值）

显示：LCD

操作：两键，M 测量，C 校正

电源：3个碱性电池供电。

工作温度：0～75℃

Continuous standard electrical conductivity range from 0 to 1999 in increments of 1 picosiemen per meter (pS/m)
Available in other standard and non-standard conductivity ranges
Large digital, liquid crystal display
Reliable advanced integrated circuit design technology
Self check calibration with field adjustment capability
Automatic over range and low battery indication
Capable of storage tank and tanker truck measurement with the use of a short cable or cable reel kit
Powered by 3 readily available alkaline batteries
Electronics housed in a rugged cast aluminum case coated with solvent resistant paint equipped with a detachable stainless steel probe
Approved intrinsically safe design for use in hazardous environments by Underwriters Laboratories (UL), Canadian Standards Association (CSA), and LCIE 
    测试便捷、可靠、精确的数字电导率仪。
❐ 也可适用于其他的标准或非标准测量范围。
❐ 大屏幕数字液晶显示。
❐ 采用先进可靠的集成电路技术。
❐ 具有场调整，实现了自动校准功能。
❐ 超测量范围或低电流时自动显示。
❐ 可以使用短的电缆或电缆盘，测试贮罐和贮罐车中的物料。
❐ 电导率仪内置于坚固、涂有防锈涂料的铝制外壳中，配有可分离的不锈钢探头。
❐ 本质安全，可在危险防爆区域内使用，通过了Underwriters Laboratories (UL)、Canadian Standards Association (CSA)和LCIE等机构的安全认证