2011/09/15 11:22
阅读:589
分享:方案摘要:
下载本篇解决方案:
台阶仪在三维形貌表征领域的应用
Stylus-based surface profiling is a standard technique for accurate, repeatable surface shape, topography and step height measurement in applications ranging from semiconductor R&D to solar cell QC.
2008/12/15
基于紫外分光光度法的水中油测试方法
矿物油组成中的共轭体系物质在紫外光区有较强的吸收,依据朗博 - 比尔定律,在256nm紫外光波长,可测定油样的吸光度来确定相应油的量。 由于紫外光度法对于油种的敏感性较强,本方法的油样需采用标准物质。
环保
2021/05/31
双相不锈钢的增强纳米压痕应用
Using Bruker’s Hysitron PI 88 SEM PicoIndenter equipped with tilt and rotation stages in conjunction with the QUANTAX EBSD system enables a more robust characterization of metallic materials by combining high resolution phase and grain orientation mapping capabilities with targeted nanomechanical property measurements. This combination could also be used to extend the scope of research related to other advanced textured, anisotropic, or multi-phase materials.
钢铁/金属
2021/09/02
智能设备中光学材料的测定实例
智能设备的功能日益多元化,如人脸识别、测距、AR功能等。其中,相机在追求高分辨的 同时,还要求外形小巧、高倍率变焦。 本资料中的数据为测试示例,不代表真实数据,仅供参考。 注意:产品升级后,上述仪器的外观或技术参数可能会有变化。 图2 潜望镜式镜头的示例 通过搭载潜望镜式镜头,可以实现相机的小巧与高倍率变焦。传统相机镜头与智能设备垂直 放置。潜望镜式镜头平行于智能设备安装,从而实现设备的超薄化。此外,变焦倍率越高, 焦距越长,因此,需要一定的纵深空间安放镜头。传统镜头由于是垂直放置,增加焦距则需增加设备厚度,而潜望镜式镜头通过棱镜改变光路方向,将焦距所需要的厚度转化为与智能设备平行的长度,同时实现了超薄化与高倍率变焦。 此次实验,在日立紫外可见近红外分光光度计UH4150上加装微小棱镜测定附件,并使用专用支架※1,测定潜望镜式镜头中的棱镜。
电子/电气
2022/06/14