Effect of surfactant on the ceria
2010-06-10 11:15
浏览:1675次
分享:
资料摘要:
The nickel–ceria (Ni–CeO2) nanocomposite coatings have been pulse electrodeposited from a Wattstype
electrolyte containing nano-sized CeO2 particles produced by high-energy ball milling technique
(HEBM). Sodium Lauryl Sulphate (SLS) has been added in the electrolyte as a cationic surfactant. The
effects of the surfactant on the zeta potential, co-deposition and distribution of ceria particles in the
nickel matrix and hardness of composite coatings have been investigated. Experimental results show
that the addition of SLS up to 0.10 g/l increases the amount of co-deposited ceria particles in the nickel
matrix and microhardness of the nanocomposite. However, when the amount of SLS in the electrolyte is
more than 0.1 g/l, there is a tendency to form agglomerates of ceria particles in the nickel matrix resulting
no further increase in hardness of the Ni–CeO2 nanocomposite coatings.
下载本篇资料:
Effect of surfactant on the ceria
1949KB
相关资料
纸浆和纸品工艺过程中用到高浓度的化学物,如氯,二氧化氯和盐酸用来漂白,由此产生的废水包含有机氯化物,这些物质对环境有害,因此废水中可吸附有机卤素AOX和纸浆中的总有机卤素TOX显得尤为重要。
比表面和孔径测量: Microtrac MRB采用气体吸附法为粉体样品的比表面值,BET值和孔径测量提供了吸附系列的分析仪器。开发和生产以及装配地点位于日本大阪的表面分析中心。
我们为客户提供先进的技术,以不断获得可靠的结果。创新和质量是我们成功的基础。
比表面和孔径测量: Microtrac MRB采用气体吸附法为粉体样品的比表面值,BET值和孔径测量提供了吸附系列的分析仪器。开发和生产以及装配地点位于日本大阪的表面分析中心。
我们为客户提供先进的技术,以不断获得可靠的结果。创新和质量是我们成功的基础。
比表面和孔径测量: Microtrac MRB采用气体吸附法为粉体样品的比表面值,BET值和孔径测量提供了吸附系列的分析仪器。开发和生产以及装配地点位于日本大阪的表面分析中心。
我们为客户提供先进的技术,以不断获得可靠的结果。创新和质量是我们成功的基础。