TA仪器Discovery流变仪

报价

面议

暂无评分

品牌

TA 仪器

样本

暂无样本

型号

DHR-1

荣誉奖项

产地

美洲

TA仪器

白金
第20年
一般经销商

营业执照已审核

留言询价电话询价

核心参数

相关方案

综合石油/化工医疗/卫生

聚合物共混和合金中性能检测方案(流变仪)
从1970到1980，美国对塑料的需求从200亿磅增加到了500亿磅。塑料的成功主要是由于其广泛的应用，由于其广泛的性能，塑料可以替代金属、玻璃、陶瓷、纸张、天然纤维、包装材料、消费产品、管道、家具，等等…… 塑料最重要的性能在于其重量轻，耐破损，能巩固功能部件，想对便宜，易于自动化生产，生产成本较低……
石油/化工 2016-04-05
材料（动态力学分析）中黏弹表征检测方案(流变仪)
在当今日益激烈的竞争环境下，高性能先进材料的开发尤为重要。许多材料制造商不在专注于单一产品领域，而是越来越趋向于多元化。以至于现在开发研究实验室经常研究一系列有明显的不同物理和化学性质的材料。因为这个原因，分析仪器必须非常灵活，它必须能够容纳存在各种各样的物理状态的样品且不影响其灵敏度和重现性。动态力学分析（DMA）也不例外，本文将讨论使用DMA测量系列材料的粘弹性特征，包括液体、聚脂薄膜、乳胶、预浸料坯和复合材料。
石油/化工 2016-04-01
高分子中高分子蠕变与回复检测方案(流变仪)
Creep recovery measurements on anionically polymerized polystyrenes and commercial low density polyethylene have been performed with a new magnetic bearing rheometer. Due to the very small residual torque, a key feature of the magnetic bearing rheometer, small recoverable compliance values in the linear viscoelastic regime could be accurately measured. The equilibrium compliance Je obtained is compared to the ratio of G’/G’’2, evaluated from oscillation measurements in the terminal region (low frequency). Excellent agreement could be found for the narrow distributed PS with a molecular weight from 13,000 to 330,000 g/mol. Finally the shear compliance of a commercial PS was converted to the dynamic moduli G’ and G’’ using approximation formulas by Schwarzl to extend the frequency range, large enough to fully describe the viscous and elastic behavior of the material.
石油/化工 2016-03-29
材料中流变特性检测方案(流变仪)
It is well known that there is an equivalence of the effects of time and temperature on the rheological properties of viscoelastic materials1. At low temperatures a material will behave in the same fashion as at high frequency, and at high temperature the material will behave as it would at low frequency. Data in a range of temperatures over modest frequency ranges( see figure 1) can be collected and arranged to predict the behavior over a wider frequency range than possible in practical testing. Bear in mind that very low frequencies can take days or weeks for measurements, and ultra high frequencies cannot be measured by existing instruments. The modulus data can then be shifted horizontally along the abscissa to overlap forming a smooth curve. This approach allows the generation of master curves of modulus data spanning considerably wider ranges of time (frequency) and/or temperature than the range of the original data (see figure 2).
石油/化工 2016-02-29

聚合物共混和合金中性能检测方案(流变仪)
从1970到1980，美国对塑料的需求从200亿磅增加到了500亿磅。塑料的成功主要是由于其广泛的应用，由于其广泛的性能，塑料可以替代金属、玻璃、陶瓷、纸张、天然纤维、包装材料、消费产品、管道、家具，等等…… 塑料最重要的性能在于其重量轻，耐破损，能巩固功能部件，想对便宜，易于自动化生产，生产成本较低……
石油/化工 2016-04-05
材料（动态力学分析）中黏弹表征检测方案(流变仪)
在当今日益激烈的竞争环境下，高性能先进材料的开发尤为重要。许多材料制造商不在专注于单一产品领域，而是越来越趋向于多元化。以至于现在开发研究实验室经常研究一系列有明显的不同物理和化学性质的材料。因为这个原因，分析仪器必须非常灵活，它必须能够容纳存在各种各样的物理状态的样品且不影响其灵敏度和重现性。动态力学分析（DMA）也不例外，本文将讨论使用DMA测量系列材料的粘弹性特征，包括液体、聚脂薄膜、乳胶、预浸料坯和复合材料。
石油/化工 2016-04-01
高分子中高分子蠕变与回复检测方案(流变仪)
Creep recovery measurements on anionically polymerized polystyrenes and commercial low density polyethylene have been performed with a new magnetic bearing rheometer. Due to the very small residual torque, a key feature of the magnetic bearing rheometer, small recoverable compliance values in the linear viscoelastic regime could be accurately measured. The equilibrium compliance Je obtained is compared to the ratio of G’/G’’2, evaluated from oscillation measurements in the terminal region (low frequency). Excellent agreement could be found for the narrow distributed PS with a molecular weight from 13,000 to 330,000 g/mol. Finally the shear compliance of a commercial PS was converted to the dynamic moduli G’ and G’’ using approximation formulas by Schwarzl to extend the frequency range, large enough to fully describe the viscous and elastic behavior of the material.
石油/化工 2016-03-29
材料中流变特性检测方案(流变仪)
It is well known that there is an equivalence of the effects of time and temperature on the rheological properties of viscoelastic materials1. At low temperatures a material will behave in the same fashion as at high frequency, and at high temperature the material will behave as it would at low frequency. Data in a range of temperatures over modest frequency ranges( see figure 1) can be collected and arranged to predict the behavior over a wider frequency range than possible in practical testing. Bear in mind that very low frequencies can take days or weeks for measurements, and ultra high frequencies cannot be measured by existing instruments. The modulus data can then be shifted horizontally along the abscissa to overlap forming a smooth curve. This approach allows the generation of master curves of modulus data spanning considerably wider ranges of time (frequency) and/or temperature than the range of the original data (see figure 2).
石油/化工 2016-02-29