ChemTron VTR-80高低温磁力搅拌反应装置
ChemTron VTR-80高低温磁力搅拌反应装置
ChemTron VTR-80高低温磁力搅拌反应装置
ChemTron VTR-80高低温磁力搅拌反应装置
ChemTron VTR-80高低温磁力搅拌反应装置

面议

10.0

ChemTron

下载

VTR-80

--

欧洲

  • 白金
  • 第18年
  • 授权经销商
  • 营业执照已审核
核心参数

产地类别: 进口

温度范围: -80~+60℃

控温精度: ±0.1℃

反映单元: 1个

反应容量: 3.1L

  • 搅拌速度: 100~800rpm

ChemTron  VTR-80高低温磁力搅拌反应装置

优莱博新型高低温搅拌反应装置具有很高的性价比 , 它们适用于实验室和工业的所有标准任务和日常工作,标配连续变径浴槽盖和夹具
> 配置高亮显示屏,设置和检测温度和转速,可远距离清晰监测设备运行情况
> 高品质不锈钢加热盘管,耐腐蚀,不结水垢,易清洗
> 低噪音设计,让实验室免除噪音污染
> 节省空间的冷却盘管设计,增大浴槽内部可用空间
> 容易拆卸的通风格栅,方便清洁制冷单元的冷凝器
> 全程工作温度范围内的过温安全保护功能,保护实验安全
> 液位浮子提供低液位报警功能,当液位过低时,声光报警并切断电源防止干烧 
> DTR 系列可外接温度传感器,直接测量与控制样品温度,标配各种通讯接口
> 可根据需要选配顶置搅拌器,解决需要大功率搅拌的问题


技术参数

订货号

型号

温度范围

搅拌速度

稳定性

加热功率

制冷功率

浴槽开口/高度

充液体积

外形尺寸



rpm

W

W

mm

L

W×L/H mm

8602040

VTR-40

-40~+60

100~800

±0.2

750

450

Ø100  Ø140 / 100

3.1

420x560 / 505

8602080

VTR-80

-80~+60

100~800

±0.2

750

400

Ø100  Ø140 / 100

3.1

545x610 / 525

8602081

DTR-80

-80~+60

100~800

±0.1

750

400

Ø100  Ø140 / 100

3.1

545x610 / 525


  • Determination of the exact concentration of the HCL titrant We recommend ready to use HCl titrant. The exact concentration of the HCL 1.000 mol/l can be determined using the titrimetric standard Tris hydroxy amino methane (TRIS). The standard can be dried for 24 h in an exsiccator at room temperature. 1-2 g of the standard are weighed accurately in a 150 mL beaker and dissolved in 80 mL of dist. water with stirring. It is titrated with the 1 mol/l HCl solution. Repeat the standardization two times. The average value is stored automatically in the exchangeable unit.

    石油/化工 2017-11-25

  • 根据DIN 38 406 - E 3-3标准检测海水、饮用水、地下水的总硬度,如果废水中的金属离子含量不高,也可以用来检测废水的硬度。

    环保 2015-01-11

  • This method is used for the quantitative determination of total hardness in drinking water. The total hardness is the sum of calcium and magnesium hardness. It is possible to titrate the Ca- and Mg hardness with a Ca-ISE electrode as two equivalence points (EQs) in one titration. But it is recommended to use the more robust Cu-ISE for the determination of total hardness

    环保 2015-01-11

  • Determination of the exact concentration of the HCL titrant We recommend ready to use HCl titrant. The exact concentration of the HCL 1.000 mol/l can be determined using the titrimetric standard Tris hydroxy amino methane (TRIS). The standard can be dried for 24 h in an exsiccator at room temperature. 1-2 g of the standard are weighed accurately in a 150 mL beaker and dissolved in 80 mL of dist. water with stirring. It is titrated with the 1 mol/l HCl solution. Repeat the standardization two times. The average value is stored automatically in the exchangeable unit.

    石油/化工 2015-01-11

  • Determination of acidic constituents in petroleum products and lubricants by potentiometric titration. The total acid number TAN is the quantity of base, expressed in milligrams of potassium hydroxide, that is required to neutralize all acidic constituents present in 1 g of sample.

    其他 2015-01-11

  • The peroxide number gives the initial evidence of rancidity in unsaturated fats and oils. Other methods are available but peroxide value is the most widely used. It gives a measure of the extent to which an oil sample has undergone primary oxidation.

    其他 2015-01-11

  • The method is suitable for samples which contents nitrate or protein. The sample is digested with sulfuric acid in the presence of a catalyst. This converts organically bound nitrogen to ammonium sulfate. In a distillation apparatus the digestion solution is treated with NaOH and the released ammonia (NH3) is distilled into a solution of boric acid. This solution is then titrated with an acid titrant (HCl or H2SO4) to a pH endpoint of 4.65.

    其他 2015-01-11

  • Electrode handling If not in use, the electrolyte should be stored in the electrolyte solution. For further details, please refer to the electrode’s operating instructions.

    其他 2015-01-11

  • 本实验由茶叶试样中的有机磷、有机氯、拟除虫菊酯类农药经加速溶剂萃取仪用乙腈十二氯甲烷提取,提取液经溶剂置换后用凝胶渗透色谱)(GPC)净化、浓缩后,用气相色谱-质谱仪进行检测,选择离子和色谱保留时间定性外标法定量。

    食品/农产品 2023-03-27

  • Standard titration For a standard titration weigh in 70- 90 mg of the NaCl standard in a 150 ml beaker, add appr. 80 ml dist. water and 1 ml HNO3 1 mol/l. Place the electrode and

    食品/农产品 2015-01-11

  • Titration In a 100 or 150 mL beaker are added 50 ml sample and 2 ml of the Glyoxal solution. After 5 minutes 5 ml of the H2SO4 25 % are added. The mixture is directly titrated with the Iodine solution to an μA endpoint.

    食品/农产品 2015-01-11

  • 测量:氢氧化钠溶液0.1mol/L(therner),0.25(SH)金(dornic 0.11)mol/L ?苏打石灰for二氧化碳吸收of the试剂。 ?titer:邻苯二甲酸氢钾(参考资料)

    食品/农产品 2015-01-11

  • The application describes the procedure of the coulometric water determination in petrochemistry products such as mineral oil and similar products. The application note describes only the direct titration and not the use of evaporation oven.

    石油/化工 2017-11-25

  • Determination of the exact concentration of the HCL titrant We recommend ready to use HCl titrant. The exact concentration of the HCL 1.000 mol/l can be determined using the titrimetric standard Tris hydroxy amino methane (TRIS). The standard can be dried for 24 h in an exsiccator at room temperature. 1-2 g of the standard are weighed accurately in a 150 mL beaker and dissolved in 80 mL of dist. water with stirring. It is titrated with the 1 mol/l HCl solution. Repeat the standardization two times. The average value is stored automatically in the exchangeable unit.

    石油/化工 2017-11-25

  • This method is a general description how to determine the water content in organic liquids such as methanol, isopropyl alcohol, glycol and other similar liquids.

    石油/化工 2015-01-11

  • The application describes the procedure of the coulometric water determination in petrochemistry products such as mineral oil and similar products. The application note describes only the direct titration and not the use of evaporation oven.

    石油/化工 2015-01-11

  • 根据DIN 38 406 - E 3-3标准检测海水、饮用水、地下水的总硬度,如果废水中的金属离子含量不高,也可以用来检测废水的硬度。

    环保 2015-01-11

  • This method is used for the quantitative determination of total hardness in drinking water. The total hardness is the sum of calcium and magnesium hardness. It is possible to titrate the Ca- and Mg hardness with a Ca-ISE electrode as two equivalence points (EQs) in one titration. But it is recommended to use the more robust Cu-ISE for the determination of total hardness

    环保 2015-01-11

  • 200 ml sample (measuring cylinder; for chlorine concentrations > 2 mg/l use less sample and fill up with dist. water to 200 ml) are filled into a 250 ml beaker. Add 1 ml KI solution and 1 ml buffer solution pH = 4.0 and titrate with the phenylarsine oxide to an equivalence point (potentiometry) or μA endpoint (amperometry)

    环保 2015-01-11

  • Titrator: TL 6000-M2/20 or TL 7000-M2/20 consists of ? Basic device ? Magnetic stirrer TM 235 ? 20 mL exchange unit WA 20, with brown glass bottle for titrant complete ? pH combination electrode with integrated temperature sensor (A 162 2M-DIN-ID, N 1052 A, BL 18…)

    环保 2015-01-11

  • Potentiometric determination of silver in silver or alloys. After dissolving in concentrated nitric acid the sample is titrated with NaCl (or KBr) or HCl using a silver combination electrode.

    钢铁/金属 2015-01-11

典型用户
用户单位 采购时间
山东世通检测公司 2013-05-14
中国科学院长春应用化学研究所 2014-10-16
北京博远祥德科学仪器有限公司 2014-03-20
湖南大学 2014-10-14
石家庄赛默科技有限公司 2013-04-15
售后服务承诺

产品货期: 56天

整机质保期: 1年

培训服务: 额外提供免费培训

其他: 质保年限:1年 保内维修承诺:非人为原因,免费维修

问商家

ChemTron化学合成仪VTR-80的工作原理介绍

化学合成仪VTR-80的使用方法?

ChemTronVTR-80多少钱一台?

化学合成仪VTR-80可以检测什么?

化学合成仪VTR-80使用的注意事项?

ChemTronVTR-80的说明书有吗?

ChemTron化学合成仪VTR-80的操作规程有吗?

ChemTron化学合成仪VTR-80报价含票含运吗?

ChemTronVTR-80有现货吗?

ChemTron VTR-80高低温磁力搅拌反应装置信息由优莱博技术(北京)有限公司为您提供,如您想了解更多关于ChemTron VTR-80高低温磁力搅拌反应装置报价、型号、参数等信息,欢迎来电或留言咨询。
移动端

仪器信息网App

返回顶部
仪器对比

最多添加5台