Terahertz太赫兹线栅起偏器

筱晓光子技术独家代理英国Thomas Keating的THZ太赫兹线栅起偏器，我们根据客户的尺寸，线栅尺度进行定制。欢迎前来定制咨询

Photolithographic Polarisers 

Our photolithographic polarisers are designed for the higher frequency range (i.e. above 3 THz) where free-standing polarisers become less efficient. They are commonly used in polarising FT spectrometers for the far infrared region and in polarisation sensitive receivers such as the higher frequency bands of ALMA. They have also been qualified for use in long-life space-borne projects such as Cassini. 

A pattern of thin parallel lines is created in metal on the surface of an ultra-thin polymeric substrate. As a consequence of their structure and of the method used to construct them, these polarisers must be circular and are usually mounted in stainless steel support frames.

 The support substrate is usually 0.9 um or 1.5 um thick Mylar, and the metal 'wires' are copper or gold. 

The polarisers are mounted in their support frames by means of a press, and each frame design requires pressing tools. We therefore offer a range of standard polariser support frame sizes. Special sizes, up to the maxima indicated in the table below, are still available but costs will include the manufacture of special press tools. 

We have a range of patterns available with dimensions as follows: 

Polarisers 

Polarisers are optical components which convert unpolarised radiation into orthogonal linearly polarised components.

We offer two distinct devices for operation throughout the millimetre and far infrared spectral region and at both ambient and cryogenic temperatures.

Wire grid polarisers are suitable at frequencies below 3 THz; wire is wound across a supporting metal frame and then glued into place. Wire diameters as low as 5 um are available, and we recommend this relatively low-cost option for frequencies up to 3 THz. Diameters up to 500 mm are possible. More information can be found below.

At higher frequencies wire grid polarisers become less efficient. For these frequencies we offer lithographic polarisers in which thin metal patterns are deposited onto ultra-thin polymeric substrates. Pattern repeat distances of 2um and 10um are standards and these are available in diameters up to approximately 200 mm. See below for further details.

Wire grid polarisers are offered using wire diameters from 5 um upwards. Our computer-controlled grid-winding machine weighs more than one tonne and is capable of winding grids up to 500 mm in diameter. The photograph shows one of the larger wire grid polarisers we have made to date – the winding of a pair like this used more than 6km of wire.

Wire is wound across a supporting metal frame and then glued in place (often sandwiched between two frame halves).

THZ线栅起偏器_太赫兹_ Thomas Keating信息由筱晓（上海）光子技术有限公司为您提供，如您想了解更多关于THZ线栅起偏器_太赫兹_ Thomas Keating报价、型号、参数等信息，欢迎来电或留言咨询。

除供应THZ线栅起偏器_太赫兹_ Thomas Keating外，筱晓（上海）光子技术有限公司还可为您提供LCoS微显示器、UHNA超高数值孔径单模光纤 NA0.35、微型在线手动直插式无光纤偏振控制器 400–2200nm等产品，公司有专业的客户服务团队，是您值得信赖的合作伙伴。