大芯径光纤准直器_high NA fiber collimator_300-2000nm光纤准直器_筱晓光子

Introduction

Collimators are required to generate a parallel beam of light out of the naturally diverging light emission from an optical fiber. Most fiber optic collimators available are designed for a low NA and thin fibers.

High NA fibers such as Polymer Optical Fibers (POF) and Hard Polymer cladding fibers with an NA above 0.38 cannot be collimated efficiently by of most these standard products, without a great reduction of output power.

Prizmatix Collimator is designed to work with High NA fibers (up to 0.53) and provides efficient solution to this problem.

Features

• Optimal performance using Aspheric Lenses

• High NA suited for High NA Polymer Optical Fibers (POF)

• Reciprocal SMA, FC or ST fiber connection

• Compact

 Applications

• Spot illumination

• Component test and inspection

• Can be used in reverse direction as a free-space to fiber coupler

Specifications

• Lens NA:0.53 suites for most high NA fibers

• Fiber Connector:  SMA or FC

• Outer Diameter:  0.70" (17.8mm)

• Length:  1.11" (28.2mm)

• Clear Aperture:  0.43" (11mm)

• Material:  Black anodized aluminium

 Why you need a collimator?

Light emits from multimode fibers as a wide cone of light. The opening angle θmax is dictated by the internal total reflection in the fiber, and is usually represented as the Numerical Aperture (NA) of the fiber.

The general relation in air is: NA= sin(θmax).

The following table compares the full emission angle (2θmax) of common NA fibers:

Collimator performance

Multimode high NA fibers are too large to be considered as a point source. Hence, the beam leaving the collimator will not be of constant diameter, but slightly expanding.

Roughly, beam divergence angle after the collimator changes with the diameter of the fiber. Smaller fibers will yield small divergence angle, whereas large core fibers will generate a larger divergence angle.

The following table indicates the pivot angle of the emission cone of Prizmatix Collimator for High NA fibers:

大芯径光纤准直器_high NA fiber collimator_300-2000nm光纤准直器_筱晓光子 信息由筱晓（上海）光子技术有限公司为您提供，如您想了解更多关于大芯径光纤准直器_high NA fiber collimator_300-2000nm光纤准直器_筱晓光子 报价、型号、参数等信息，欢迎来电或留言咨询。

除供应大芯径光纤准直器_high NA fiber collimator_300-2000nm光纤准直器_筱晓光子 外，筱晓（上海）光子技术有限公司还可为您提供1200 l/m@ 840 nm OCT光栅（ 50.8X6mm）、C-Band DWDM EDFA C波段 增益平坦 功率放大器、1392nm宽带光纤光栅FBG滤波器等产品，公司有专业的客户服务团队，是您值得信赖的合作伙伴。