承压高达10000psi,流速范围0-300ml/min,双泵头连续送液,能够满足高压大流量稳定输送液体的需求。
CP300精密恒流泵产品优越性
简单直观的面板键盘可设定以下功能:
流速设定/显示 快速排液/排气
低/高压限设定 压缩性补偿设定
压力单位设定(PSI, MPa或bar) 控制方式设定 (键盘, 微机或外部模拟信号)
显示亮度 实时监测压力上下限值
参数:
low Rate Range 0.1 – 300.0 mL/min
Flow Rate Increment 0.1 mL/min
Flow Rate Accuracy* ±5% (5.0 – 300.0 mL/min; 80:20 Water/IPA; 1,000 psi)
Flow Reproducibility 0.5% RSD (5.0 – 300.0 mL/min; 80:20 Water/IPA; 1,000 psi)
Maximum Delivery Pressure 220 VAC supply: 10,000 psi
110 VAC supply: 10,000 psi (up to 250mL/min—see chart below for pressure rating curve)
Pressure Accuracy ±50 psi
Pulsation ≤5.0% @ 150 mL/min and 80:20 Water/IPA; 3,000 psi
Piston Displacement 452 µL
Piston Wash Self-flushing pump heads – continuous wash without auxiliary pump
Wetted Materials 316 Stainless Steel, Alumina, Zirconia, UHMWPE, PTFE, PEEK
Dimensions (H x W x D) 8.9” x 13.9” x 22.1” (22.6 x 35.3 x 56.1 cm)
Weight 50.0 lbs (22.7 kg)
Power 100 – 240 VAC (±10%), 50 – 60 Hz, 700 W
Front Panel LCD display to monitor flow rate, pressure, and indicate parameters and alarms. Numerical keypad, Run/Stop, and Menu Navigation.
Communication RS-232 (serial communications), Run/Stop TTL
Viscosity** 0.5 – 10.8 cP
Liquid Temperature 0 – 82 °C
Environment Indoor use only (Pollution degree 2)
Altitude Up to 2000 m (6500 ft)
Ambient Temperature 10 – 30 °C
Humidity 20 – 90% relative humidity
*Flow Rate is dependent on solvent selection and operating pressure. **Range of fluid viscosities where published flow accuracy is maintained.