Split/Splitless Inlet (SSL) |
|
|
|
Top level subassemblies for SSL inlet accessories: |
|
|
|
• G4352A 0-60 psi split/splitless inlet accessory kit |
|
|
|
• G4328A 0-100 psi split/splitless inlet accessory kit |
|
|
Description |
|
|
|
SSL Inlet accessory, 0-60 PSIG, without ship kit | G4352-60500 |
|
|
SSL Inlet accessory, 0-100 PSIG, without ship kit | G4352-67501 |
|
|
SSL Weldment assembly without EPC module | G4352-60512 |
|
|
Inert S/SL Weldment Assembly w/inert liner * | G4353-67000 |
|
|
EPC Module for SSL inlet, 0-60 PSIG | G4352-60552(non-RoHS) |
|
|
EPC Module for SSL inlet, 0-60 PSIG | G4352-60852 (RoHS) |
|
|
EPC Module for SSL inlet, 0-100 PSIG | G4352-67560 |
|
|
|
|
|
|
SSL EPR Inlet: |
|
|
|
SSL Weldment assembly without EPC/EPR module | G4352-60512 |
|
|
0~100psi SSL EPR Manifold Assembly | G4352-67652 |
|
|
|
|
|
|
|
|
|
|
Split/Splitless Inlet |
|
|
|
O-ring, 12/pk (2 for EPC module seal, 2 for valve seal) | 5180-4181 |
|
|
Screw, captive, M3 x 8 mm long | G3430-20028 |
|
|
Septum nut, standard | G4352-60730 |
|
|
Septum, standard | See consumables |
|
|
Top insert assembly, standard | G4352-60730 |
|
|
Top insert assembly, Inert* | G4353-60730 |
|
|
|
|
|
|
SSL Split vent trap (7820) |
|
|
|
Trap shell front, brass | G1544-20675 |
|
|
Copper tube, 1/8-inch |
|
|
|
1/8-inch brass nut and ferrule set | 5181-7481 |
|
|
Trap O-ring | 0905-1291 |
|
|
Chemical trap assembly | G1544-80540 |
|
|
Trap retaining Nut | G1544-20650 |
|
|
Trap shell back weldment assembly | G3452-60506 |
|
|
O-ring, size 2-006, fluorocarbon, 12/pk | 5180-4181 |
|
|
Proportional valve, split vent | G3430-60527 |
|
|
Screw | G3430-20026 |
|
|
|
|
|
|
Split Splitless Inlet Body |
|
|
|
Screw, M4 x 12 mm, Torx T-20 | 0515-2496螺丝,M4x12毫米,Torx T-20 |
|
|
Inlet weldment | G1544-80570 |
|
|
Inert Inlet weldment* | G4352-60570 |
|
|
Insulation, top | G1544-00010 |
|
|
Heater/sensor assembly | G1530-61950 |
|
|
Screw, M5 x 10 mm | 0515-4788 |
|
|
Heater block | G3452-20500 |
|
|
Insulation block | G3452-00002 |
|
|
Insulation bottom | G3432-00003 |
|
|
Retaining nut for heater block | G1544-20590 |
|
|
Gold seal kit, includes washer | 5188-5367 |
|
|
Reducing nut | 18740-20800 |
|
|
Ferrule | See consumables |
|
|
Column nut | See consumables |
|
|
|
|
|
|
|
|
|
|
Split Splitless Inlet Warmer |
|
|
|
Insulation | 19243-00068 |
|
|
Bottom insulation cover | 19243-00070 |
|
|
Screw, M4 x 12 mm, Torx T-20, chrome-plated | 0515-2711 |
|
|
|
|
|
|
|
|
|
|
Consumables and Parts for the Split/Splitless Inlet |
|
|
|
See the Agilent catalog for consumables and supplies (currently p/n 5989-9611) for a more complete listing, or visit the Agilent Web site for the latest information (http://www.agilent.com/chem/supplies). |
Split, splitless, direct, and direct connect inlet liners |
|
|
|
Mode | Description | Deactivated | Part number |
Split | Low-pressure drop, glass wool, single taper, 870 μL | Yes | 5183-4647 |
Split | Glass wool, 990 μL | No | 19251-60540 |
Split-Manual only | Empty pin and cup, 800 μL | No | 18740-80190 |
Split-Manual only | Packed pin and cup, 800 μL | No | 18740-60840 |
Splitless | Single taper, glass wool, 900 μL | Yes | 5062-3587 |
Splitless | Single taper, no glass wool, 900 μL | Yes | 5181-3316 |
Splitless | Dual taper, no glass wool, 800 μL | Yes | 5181-3315 |
Splitless-Direct inject | 2-mm id, quartz, 250 μL | No | 18740-80220 |
Splitless-Direct inject | 2-mm id, 250 μL | Yes | 5181-8818 |
Direct inject - Headspace or purge and trap | 1.5-mm id, 140 μL | No | 18740-80200 |
Direct column connect | Single taper, splitless 4-mm id | Yes | G1544-80730 |
Direct column connect | Dual taper, splitless 4-mm id | Yes | G1544-80700 |
Description | Part number |
|
|
Septum retainer nut | 18740-60835 |
|
|
Strain relief septum nut for headspace | 6410090050 |
|
|
11-mm septum, high-temperature, low-bleed, 50/pk | 5183-4757 |
|
|
11-mm septum, prepierced, long life, 50/pk | 5183-4761 |
|
|
Merlin Microseal septum (high-pressure) | 5182-3444 |
|
|
Merlin Microseal septum (30 psi) | 5181-8815 |
|
|
Nonstick fluorocarbon liner O-ring (for temperatures up to 350 °C), 10/pk | 5188-5365 |
|
|
Graphite O-ring for split liner (for temperatures above 350 °C), 10/pk | 5180-4168 |
|
|
Graphite O-ring for splitless liner (for temperatures above 350 °C), 10/pk | 5180-4173 |
|
|
Split Vent Trap PM Kit, Single Cartridge, 2 O-rings | 5188-6495 |
|
|
Retaining nut | G1544-20590 |
|
|
Gold-plated seal (standard application) | 5188-5367 |
|
|
Gold-plated seal with cross (high split flows) (includes SS washer) | 5182-9652 |
|
|
Stainless steel washer (0.375-inch od), 12/pk | 5061-5869 |
|
|
Reducing nut | 18740-20800 |
|
|
Column nut, blanking plug | 5020-8294 |
|
|
Preventative maintenance kit, split | 5188-6496 |
|
|
Preventative maintenance kit, splitless | 5188-6497 |
|
|