Method | Title | Recommended Agilent Column | Part No. |
D 2593 | Standard Test Method for Butadiene Purity and
Hydrocarbon Impurities by GC | GS-Alumina, 30 m x 0.53 mm | 115-3532 |
CP-Al2O3/KCl, 25 m x 0.32 mm, 5.00 μm | CP7515 |
CP-Al2O3/KCl, 50 m x 0.53 mm, 10.00 μm | CP7518 |
D 2712 | Standard Test Method for for Hydrocarbon Traces
in Propylene Concentrates by GC | GS-Alumina, 50 m x 0.53 mm | 115-3552 |
D 2743 | Standard Practices for Uniformity of Traffic Paint
Vehicle Solids by Spectroscopy and Gas
Chromatography | CP-Sil 88 for FAME, 50 m x 0.25 mm, 0.20 μm | CP7488 |
D 2804 | Standard Test Method for Purity of Methyl Ethyl
Ketone by GC | DB-WAX, 30 m x 0.53 mm, 1.00 μm | 125-7032 |
DB-210, 15 m x 0.53 mm, 1 μm | 125-0212 |
CP-WAX 52 CB, 30 m x 0.32 mm, 0.50 μm | CP8763 |
CP-WAX 52 CB, 30 m x 0.53 mm, 1.00 μm | CP8738 |
D 2887 | Standard Test Method for Boiling Range Distribution
of Petroleum Fractions by GC | DB-2887, 10 m x 0.53 mm, 3.00 μm | 125-2814 |
CP-SimDist UltiMetal, 5 m x 0.53 mm, 0.88 μm | CP7570 |
CP-SimDist UltiMetal, 10 m x 0.53 mm, 2.65 μm | CP7582 |
CP-SimDist UltiMetal, 5 m x 0.53 mm, 0.17 μm | CP7532 |
Extended D 2887 | Standard Test Method for Boiling Range Distribution
of Petroleum Fractions by GC, to C60 | HP-1, 10 m x 0.53 mm, 0.88 μm | 19095Z-021 |
HP-1, 5 m x 0.53 mm, 0.88 μm | 19095Z-020 |
D 2908 | Standard Practice for Measuring Volatile Organic
Matter in Water by Aqueous-Injection GC | CP-Select 624 CB, 30 m x 0.32 mm, 1.80 μm | CP7414 |
CP-Select 624 CB, 75 m x 0.53 mm, 3.00 μm | CP7417 |
CP-WAX 52 CB, 30 m x 0.32 mm, 0.50 μm | CP8763 |
CP-WAX 52 CB, 30 m x 0.53 mm, 1.00 μm | CP8738 |
D 3054 | Standard Test Method for Analysis
of Cyclohexane by GC | DB-1, 60 m x 0.32 mm, 0.50 μm | 123-106E |
D 3168 | Standard Practice for Qualitative Identification
of Polymers in Emulsion Paints | CP-Sil 5 CB, 30 m x 0.32 mm, 1.00 μm | CP8760 |
CP-Sil 5 CB, 30 m x 0.53 mm, 1.50 μm | CP8735 |
D 3257 | Standard Test Method for Aromatics in Mineral
Spirits by GC | DB-624, 30 m x 0.53 mm, 3.00 μm | 125-1334 |
D 3271 | Standard Practice for Direct Injection of
Solvent-Reducible Paints into a Gas Chromatograph
for Solvent Analysis | CP-PoraPLOT Q, 25 m x 0.53 mm, 20.00 μm | CP7554 |
CP-WAX 52 CB, 30 m x 0.53 mm, 1.00 μm | CP8738 |
D 3328 | Standard Test Methods for Comparison of
Waterborne Petroleum Oils by Gas Chromatography | CP-Sil 5 CB, 30 m x 0.32 mm, 3.00 μm | CP8687 |
CP-Sil 5 CB, 30 m x 0.53 mm, 3.00 μm | CP8677 |
D 3329 | Standard Test Method for Purity of Methyl Isobutyl
Ketone by GC | DB-WAX, 30 m x 0.53 mm, 1.00 μm | 125-7032 |
DB-624, 30 m x 0.45 mm, 2.55 μm | 124-1334 |
CP-WAX 52 CB, 60 m x 0.53 mm, 1.00 μm | CP8798 |
D 3432 | Standard Test Method for Unreacted Toluene
Diisocyanates in Urethane Prepolymers
and Coating Solutions by GC | HP-1ms, 30 m x 0.32 mm, 1.00 μm | 19091S-713 |