回复Insp_5e4017ec发表于:2020/9/3 15:37:25悬赏金额:
4积分 状态:
未解决
压头表面光滑,但不需抛光,采用防止垂直运动的球型连接件进行装配或其他适宜方法。压头直径为200+3 mm,底部边缘倒圆半径为1.0+95mm.这是GB10807
The indentor shall be mounted preferably by a ball joint free from vertical movement, although other methods of mounting are permitted. The indentor shall be flat and circular, with a diameter of 200+3 mm and a 1,0+0,5 mm radius at the lower edge. The lower surface shall be smooth but not polished.这是iso2439
请问国标里面其他事宜方法是什么意思,是其他方法也要保证防止垂直运动吗,英文里说其他装配方法也允许,是不是直接将压盘装上就行呢,可以不用球型连接吗